Sauder Harbor View 403793 - Step 18: Drill Holes and Fasten Modesty Panel

å
Use a drill and a 1/8" drill bit to complete the two holes in
the DRAWER LEFT END (D).
å
Fasten the other MODESTY PANEL (I) to the
DRAWER LEFT END (D). Use two BLACK 1-7/8" FLAT
HEAD SCREWS (GGG).
å
Fasten an ANGLE BRACKET (BBB) to the SMALL TOP (H2)
and MODESTY PANEL (I). Use two BLACK 9/16" LARGE
HEAD SCREWS (JJJ).
Step 18
403793www.sauder.com/services
Pae 23
H2
I
D
Use a 1/8" drill bit in the LEFT END (D).
BLACK 9/16" LARGE HEAD SCREW
(2 used for the ANGLE BRACKET)
JJJ
BBB
BLACK 1-7/8" FLAT HEAD SCREW
(2 used for the MODESTY PANEL)
GGG