Sauder Harbor View 417586 - Page 45

å
Insert the HIDDEN WIRELESS Qi COMPATIBLE CHARGER
by EGGTRONIC into the large hole in the TOP (H3).
å
Use the two SCREWS included with the CHARGER to secure
the CHARGER into the TOP (H3). Feed the charging cord
out through the hole in the BACK.
å
NOTE: There are no pre-drilled holes in the hole in the TOP
for the CHARGER. The sides of the CHARGER will expand
into the sides of the large hole as you tighten the SCREWS.
å
Turn two CORD CLIPS (4P) into the TOP (H3).
å
NOTE: The CORD CLIPS are used to hold the charging cord
against the TOP.
Step 35 Optional Hidden Wireless Qi Compatibile Charger by Eggtronic (sold separately)
The sides of the CHARGER
will expand into the sides
of the large hole as you
tighten the SCREWS.
WARNING
Please use the wireless charging port
correctly and safely. Improper use can
cause safety hazards, or damage to your
furniture or household items. Carefully
read the following safety information.
• AVOID dropping
• NEVER use in or near water
• DO NOT disassemble
• DO NOT expose to liquids
• DO NOT use with an extension cord
For safest and fastest charge, only use
original or certifi ed cables.
H3
The sides of the CHARGER will
expand into the sides of the large
hole as you tighten the SCREWS.
4P
417586www.sauder.com/service
Page 45