Sauder Harbor View 417586 - Page 51

Step 42
å
Fasten a CABINET RIGHT (40AW) and a CABINET LEFT (40AX)
to the KEYBOARD UPRIGHTS (Q2). Use four GOLD 5/16" FLAT
HEAD SCREWS (3S).
å
NOTE: The CABINET RAILS are marked "CABINET RIGHT" and
"CABINET LEFT" for easy identifi cation.
å
NOTE: Be sure to use the exact holes shown.
å
Fasten the METAL BRACKETS (2G) to the KEYBOARD
UPRIGHTS (Q2). Use four BLACK 9/16" LARGE
HEAD SCREWS (1S).
å
NOTE: Be sure the edges of the METAL BRACKETS are even
with the edges of the KEYBOARD UPRIGHTS.
GOLD 5/16" FLAT HEAD SCREW
(4 used for the CABINET RAILS)
3S
Q2
Surface with
HIDDEN CONNECTORS
Roller end
Roller end
4 0 A W
40AW
4 0 A X
40AX
Q2
Surface with
HIDDEN CONNECTORS
BLACK 9/16" LARGE HEAD SCREW
(4 used for the METAL BRACKETS)
1S
2G
2G
2G
2G
417586www.sauder.com/service
Page 51