Sauder Lateral File - Page 5

Step 1
Look for this icon. It means a
video assembly tip is available at
www.sauder.com/services/tips
å
Assemble your unit on a carpeted fl oor or on the empty
carton to avoid scratchin your unit or the fl oor.
å
To bein assembly, push a SAUDER TWIST-LOCK®
FASTENER (12F) into the lare holes in the
ENDS (A and B). Repeat this step for the SHELF (D),
BOTTOM (F), and BACKS (G).
Do not tihten the TWIST-LOCK® FASTENERS in this step.
(16 used)
12F
A
B
420040www.sauder.com/services
Pae 5
STOP
If you purchased
the 419961 Hutch,
assemble that unit
fi r s t .