Need help?Do you have a question about the Saunier Duval 2-075 AK and is the answer not in the manual?
Details the physical dimensions of the cassette units, including height, length, and depth for different models.
Specifies the minimum clearances required around the unit for proper installation and airflow.
Guidance on selecting an appropriate location for unit installation, considering airflow and obstructions.
Provides advice on safely and correctly mounting the unit, including lifting and leveling.
Specific instructions for installing the cassette unit when no suspended ceiling is present.
Detailed procedures for integrating the cassette unit into a false ceiling structure.
Instructions for correctly installing and routing the unit's drainpipes to prevent leaks and backflow.
Procedure to verify the proper functioning of the condensate drainage system after installation.
Steps for fitting the external decorative panel, ensuring proper alignment and preventing issues.
Guidelines for connecting refrigerant and water pipes to the unit, including insulation.
Information on connecting fresh air intake pipes for specific models, detailing diameter and length.
Instructions for connecting and sealing air distribution ducts for airflow management.
Steps for disassembling the cover and connecting electrical wires to the unit's terminals.
Overview of the unit's wiring, including power supply details and connection points.
Detailed wiring schematic specific to the 2-035 AK and 2-050 AK unit models.
Detailed wiring schematic specific to the 2-075 AK unit model.
Steps to follow for conducting the post-installation test operation of the air conditioner.
General| Power Supply | 220-240V, 50Hz |
|---|---|
| Refrigerant | R410A |
| Type | Wall-mounted split system |
| Cooling Capacity | 7.5 kW |
| Heating Capacity | 8.0 kW |
| Operating Temperature (Cooling) | 18°C to 43°C |
| Operating Temperature (Heating) | -7°C to 24°C |
To Next Page