What to do if the sauter Thermostat shows temperature out of range?
If your sauter Thermostat displays a temperature outside the measuring range, try the following: remove any external heat sources nearby to allow the sensor to cool down. If that doesn't work, consider repositioning the room sensor. As a next step, check the thermostat or external sensor and replace it if necessary. Also, ensure the external sensor is properly connected.
Why sauter Thermostat has no signal from external sensor?
If your sauter Thermostat isn't receiving a signal from the external sensor, consider these possibilities: there may be no external sensor connected. The external sensor might not meet the required specifications. You can try deactivating the external sensor in parameter setting 040. Also, check the external sensor and replace it if necessary.
How to fix fault in internal sensor of sauter TRA 410?
If there's a fault in the internal sensor of your sauter Thermostat, try restoring the device to its factory settings via the “Settings” menu. If this doesn't resolve the issue, the room thermostat may be faulty and require replacement.
General| Brand | sauter |
|---|---|
| Model | TRA 410 |
| Category | Thermostat |
| Language | English |
To Next Page
