Sav 220.76 - 9 Removal and Disposal

Version 1.0
[ 73 ]
SAV 220.76 /SAV 242.92 /SAV 243.70 /.71 /
SAV 243.72 /.73 /.76 /.77 /.78 /.79 /.80 /.99
Version 1.0
[ 73 ]
EN
SAV 220.76 /SAV 242.92 /SAV 243.70 /.71 /
SAV 243.72 /.73 /.76 /.77 /.78 /.79 /.80 /.99
9 REMOVAL AND DISPOSAL
9. REMOVAL AND DISPOSAL
The safety information from section 2 “Safety” must be observed.
DANGER!
Risk of crushing!
There is a risk of limbs being crushed by the magnetic chucks tipping over
or falling during removal.
■
Persons may only be present outside of the hazard area. Do not stand
under suspended loads!
■
Secure the magnetic chucks and system parts against falling or tipping
over.
Only use sufficiently large load attachment devices for transport.
■
When lifting the magnetic chucks, only use suitable and approved lifting
gear which are designed for the weight of the magnetic chucks.
■
Use the lifting threads on the larger pole plates. Use lifting lugs (see
section 4).
■
Do not use any magnetic lifting devices!
The components of machines and systems are recyclable materials.
They must be reintroduced into the recycling process as per the WEEE Directive 2012/19/EU.
■
Dispose of the electro permanent magnetic chucks in line with the applicable country-specific
regulations.