Need help?Do you have a question about the Sav 876.10 and is the answer not in the manual?
Highlights risks associated with unqualified personnel and improper operation of the control unit.
Defines the intended use with SAV magnetic chucks and specifies operational limitations.
Details hazards from high currents, emphasizing disconnection and grounding procedures.
Stresses the importance of operator training and outlines their safety responsibilities.
Specifies the operator's location and the need for electronic disconnection during setup.
Details requirements for protecting the unit from environmental factors like water, steam, and dust.
Explains safety features such as shock-proofing and automatic reset mechanisms.
Provides technical specifications, electrical details, and dimensions for various chuck types.
Covers general mounting and connection steps for the control unit and associated components.
Describes how to position workpieces using reduced holding force for initial setup.
Details the procedure for operating the unit to achieve full holding force during machining.
Explains the steps for safely unloading workpieces and performing demagnetization.
Lists manufacturer declarations and relevant European standards applied to the product.
Details the product warranty period, terms, and specific conditions that exclude coverage.
General| Brand | Sav |
|---|---|
| Model | 876.10 |
| Category | Control Unit |
| Language | English |
To Next Page
