Savant SST-W100 Quick Reference Guide

The Savant Wireless Thermostat (SST-W100) is a Wi-Fi® enabled
digital thermostat designed to control a Heating, Ventilation and Air
Conditioning (HVAC) system. Use this document as a reference when
opening, installing, powering, and connecting to a local wireless
network. Once connected, the SST-W100 can join the Savant Control
system. For more information on configuring the thermostat, refer to
the SST-W100 Deployment Guide (009-0802-xx) and SST-W100
User Guide (009-0957-xx). All documents can be found on the
Savant Customer Community.
Box Contents
(1) SST-W100 Thermostat
(1) Installation Kit
(2) Drywall Anchors
(2) #6 x ¾ in self tapping screws
(1) Wire Labels (Sheet of wire label stickers)
(1) Quick Reference Guide (this document)
Optional Components
SST-TEMP1-xx - Remote Indoor Temperature Sensor
SST-OTEMP1-xx - Remote Outdoor Temperature Sensor
Specifications
Environmental
Environmental
Temperature
32° to 104° F (0° to 40° C)
Humidity
10% to 90% Relative Humidity (non-condensing)
Dimensions with Faceplate
Dimensions with Faceplate
Height
3.96 in (10.06 cm)
Width
5.775 in (14.67 cm)
Depth
0.58 in (1.47 cm)
Weight
Net - 0.5 lb (0.23 kg)
Weight
Shipping - 2.0 lb (0.91 kg)
Power
Power
Input Power
24V AC (19V AC - 28V AC)
Input Power
Connect to terminals 24C and 24RH on terminal
block on back panel.
Requires both R and C from the HVAC system.
Max. current draw
200 mA
Cable Requirements
Cable Requirements
Power
#18 AWG
HVAC
#18 AWG Thermostat Wire (solid)
Remote Sensors
#24 AWG (Cat 5) 500 feet (152 m) maximum
Regulatory
Regulatory
Safety and
Emissions
FCC Part 15 | UL Class 2
For more details, refer to the Regulatory section
RoHS
Compliant
Standards
Standards
Wireless
Wi-Fi (802.11 b/g)
Security
WPA1™, WPA2™, WPA1™ + WPA2™
Connections
Connections
Two 8-position screw down connectors mounted to inside of back
panel. Each terminal is marked. Refer to table for a description of
each terminal.
Two 8-position screw down connectors mounted to inside of back
panel. Each terminal is marked. Refer to table for a description of
each terminal.
Minimum Supported Release
Minimum Supported Release
Savant OS
da Vinci 5.2
Front View
Each of the buttons are multipurpose buttons. The function of each
button changes depending on the screen currently displayed. The
information below describes the main screen shown above.
The Outside temperature displayed is retrieved from the
remote sensor RS2 when configured as an outdoor sensor.
Displays local time. The time is set through the MENU button.
The status of the HVAC system is displayed here. From the
image above:
• Sys Off - HVAC system is Off.
• Fan Off - Fan is Off.
• Link OK - Connected to a local Wi-Fi® network.
The temperature displayed is the local indoor temperature.
Pressing the MENU button for the first time opens the SET
CLOCK menu. Once the clock is set, pressing the MENU button
will open the main menu.
MODE button selects Off, Heating, Cooling, or Auto.
Heat Mode controls a heating system, Cool Mode controls a
cooling system, and AUTO Mode controls both.
G
The relative humidity displayed is retrieved from a humidity
sensor that is internal to the SST-W100.
H
The high and low setpoints are displayed. To modify each,
press the up/down arrow button to the right of each setpoint.
I
The up/down arrow buttons are multipurpose buttons. In the
screen shown, pressing the up or down arrow button will open
the high and low setpoint windows. In other windows, the
buttons are used to move up and down a list of items.
J
Fan Mode can be changed between On, Auto, and Cycle.
Select the correct mode for your HVAC system.
K
Used in various screens for different functions.
SST-W100 | 009-1309-01 | 160229
SST-W100 | 009-1309-01 | 160229
45 Perseverance Way, Hyannis, MA 02601
Copyright © 2016 Savant Systems, LLC
1
of
4
Savant.com | 508.683.2500
SST-W100 Wi-Fi Thermostat
Quick Reference Guide
For Product Info

Savant SST-W100 Specifications

General

Brand	Savant
Model	SST-W100
Category	Thermostat
Language	English