What to do if Savaria Lifting Systems platform does not move?
If the Savaria Lifting Systems platform isn't moving, make sure the key is in the ON position (if your unit has one). Also, verify that all doors are completely closed. Check the Emergency Stop button to ensure it hasn't been pushed in; it should be pulled out for normal use. If the platform is at the top, examine the underpan sensor.
How to troubleshoot Savaria V1504 Lifting Systems when platform goes up but does not come down?
If the platform on your Savaria Lifting Systems goes up but doesn't come down, check the underpan sensor. Pull down on the underpan to ensure it is not stuck in the activated position.
What to check if Savaria V1504 platform comes down but does not go up?
If the platform of your Savaria Lifting Systems comes down but does not go up, check the power supply. This includes inspecting the breaker, cord, and battery.
Details how an attendant operates the lift from the lower or upper landing.
Instructions for using the Car Operating Panel (COP) controls to operate the lift.
Instructions for using the landing station (hall call) controls to operate the lift.
Details the optional platform gate and the safety underpan with obstacle detection.
Explains the safety brake for chain failure and the function of emergency stop buttons.
Covers manual/battery lowering and the function of door locks for secure operation.
Instructions for manually opening doors using emergency keys for specific lock types.
General maintenance tasks and frequencies for commercial and residential use.
Section for recording adjusted maintenance based on local codes or specific needs.
General| Category | Vertical Platform Lift |
|---|---|
| Platform Material | Aluminum |
| Compliance | ASME A18.1, CSA B355 |
| Load Capacity | 750 lbs |
| Maximum Capacity | 750 lbs |
| Rated Load | 750 lbs |
| Power Supply | 120V |
| Control Type | Push-button |
| Motor | AC Motor |
| Motor Power | 1 HP |
| Safety Features | Emergency Stop |
| Lowered Height | 3 in |
To Next Page