Why is water flowing slowly from my Savio F100 Livingponds Filter filter?
If water is flowing slowly from your Savio Water Filtration System filter, the pump might be off, obstructed, or the feed line could be blocked. First, check if the pump is operating correctly. If the pump is running, examine the feed line for any obstructions and remove them.
What to do if my Savio Water Filtration Systems filter overflows?
If your Savio Water Filtration System filter is overflowing, it could be due to an obstructed outlet, the absence of a 90º downspout at the intake, or an incorrect plumbing setup. Remove any obstructions from the outlet. Also, refer to the filter assembly instructions to ensure the 90º downspout is correctly installed and that the plumbing configuration is accurate; correct any identified issues.
Why is my pond water not clear using Savio Water Filtration Systems?
If the pond water is not clearing with your Savio Water Filtration System, it may be due to several reasons: the bacteria haven't established yet, the filter is too small for the pond, the filter media has been over-cleaned, or the pond is overstocked. To address this, you can add beneficial bacteria and wait for 3-4 weeks for them to establish. If the filter is too small, consider adding a second filter or a UV clarifier. If the filter media was over-cleaned, refer to the maintenance section for proper media care. If the pond is overstocked, reduce the fish population or increase filtration.
General| Brand | Savio |
|---|---|
| Model | F100 Livingponds Filter |
| Category | Water Filtration Systems |
| Language | English |
To Next Page
