Disclaimer
1. This document is provided "as is". The information in this document is believed to be accurate and
reliable. However, Saxdor is not responsible for the content of this document, insofar as legally
permissible, and makes no representations or warranties, express or implied, as to the accuracy or
completeness of such information and shall not be liable for the consequences of the use of the
information included.
2. This document, unless explicitly otherwise indicated, does not include any implied warranties of
satisfactory quality, merchantability, fitness for a particular purpose, compatibility or non-
infringement.
3. Saxdor reserves the right to make changes to the information published in this document, including
without limitation specifications and product descriptions, at any time and without notice.
4. This document supersedes and replaces all information supplied prior to the publication hereof.
5. Saxdor products are not designed, authorized or warranted to be suitable for applications where
failure or malfunction could result in personal injury, death, or serious property or environmental
damage. Saxdor is not responsible for the incorporation and/or use of its products in such situations
or applications, and therefore, such inclusion and/or use is at the User's own risk.
6. Neither Saxdor nor anyone else who has been involved in the creation, production or delivery of the
Product shall be liable for any special, indirect, consequential, incidental or punitive damages
(including, but not limited to, lost revenues, profits and/or savings) arising from reasonably improper
use or inability to use the Product, even if Saxdor has been informed of the possibility of such
damages or claims.
1.4 Definitions
See here the conventions used in this manual.
Measurement units
Measurement units are, in general, given in accordance with the International System of Units (SI) and the
United States Customary Units (USCS). Exceptions:
• Wind force is given in the Beaufort scale (BFT)
• Speed is given in knots (kn).
Figures
All figures are shown for illustration purposes only. Actual product may vary depending on the selected
optional features and equipment.
• Details framed in solid red line illustrate areas and equipment locations on your boat.
• Details framed in dotted red line refer to areas or equipment which are inside your boat or not
directly visible in the figure.
• Green arrows indicate emergency exits.
• Filled orange circles refer to designated passenger seats.
• Filled orange area with diagonal lines illustrates the working deck area.
Safety symbols
Warnings and cautions are labeled in accordance with the international ISO and ANSI standards.
1 Welcome on board
200 Owner's Manual Model year: 2023 200OMmy2301EN
Subversion: 01 2023-05-24 revision A
© 2023 Saxdor Yachts Oy Page 8 (76)
To Next Page
