Saxon 3350437 User Manual

Parts List
Step 6: Locate both leg braces (F) and ensure the
long side is near the centre of the frame brace (D)
and the short side is closest to the leg (E) – refer to
image. Bring both of leg braces together so that
they meet in centre of the frame brace (D) and
secure with small bolt (L), spring washer, washer
and nut.
Step 7: Attach the leg brace (F) to each leg, using small bolt (L) and secure with
spring washer, washer and nut. Repeat for the other side.
Step 8: Insert the small bolt (L) through the inside of
the tray, the front support (G) and the front support
plate (H). Secure with spring washer, washer and nut.
Make sure the front support brace is in correct position
and do not secure this brace to the handle frame at this
stage. This needs to occur in the next step(refer to
image)
Step 9: Attach the Axle bracket (I), to the front of the
handle frame, using medium bolt (M). Ensure the
dimple you can see on the axle bracket is facing
outwards (refer to image). Secure with spring washer,
washer and nut. Please note: only secure one of the
axle brackets in place.
Step 10: Slide the axle (J) through the wheel (K) and
insert into the xed axle bracket. Using medium bolt (M)
secure the other axle bracket (I) into position with spring
washer, washer and nut.
Step 11: Tighten all nuts securely. Inate the tyre to a maximum 25PSI. Please ensure you use a manual pump to
avoid injury and do not over inate.
Your wheelbarrow is now fully assembled and ready for use.
4 of 4 1 of 4
A. Fork
1
2
1
1
2
2
2
1
2
1
1
5
4
4
C. Tray
B. Handle Grips
D. Frame Brace
F. Leg Brace
E. Leg
G. Front Support
I. Axle Bracket
H. Support Plate
J. Axle
L. Bolt Small
K. Wheel
M. Bolt Medium
N. Bolt Long
60 LITRE GARDEN WHEELBARROW
(Item No. 3350437)
Assembly Instructions
Picture Description Qty Picture Description Qty
Long
side
Short
side

Saxon 3350437 Specifications

General

Brand	Saxon
Model	3350437
Category	Lawn and Garden Equipment
Language	English

Summary

Assembly Instructions Part 1

Step 6: Leg Braces Attachment

Locating and securing leg braces to the frame brace using small bolt, spring washer, washer and nut.

Step 7: Leg Brace to Leg Attachment

Attaching leg braces to each leg using small bolt, spring washer, washer and nut.

Step 8: Front Support Brace Installation

Inserting bolt through tray, front support and plate; securing loosely.

Step 9: Axle Bracket Installation

Attaching one axle bracket to the handle frame front using medium bolt.

Step 10: Axle and Second Bracket Assembly

Sliding axle through wheel and bracket, securing second bracket.

Step 11: Final Tightening and Tire Inflation

Tightening all nuts and inflating tire to maximum 25PSI using a manual pump.

Parts List

Assembly Instructions Part 2

Step 1: Fork and Handle Grips Connection

Joining the fork and the handle grips together.

Step 2: Tray and Handle Connection

Connecting handles to the tray using a long bolt through front tray holes.

Step 3: Frame Brace Placement

Sliding the frame brace between the tray and the rear holes of the handle grips.

Step 4: Leg to Handle/Tray Connection

Connecting a leg to handle grips and tray using long bolt, spring washer, washer, and nut.

Step 5: Second Leg and Tray Securement

Securing the other leg to the tray, handle, and frame brace.