‐6‐
4) Ifkey‐fobdetectsany controller started networklearnmode,itimplementcopy controller procedureandLEDindicator
light on for 3 seconds after copy successful; If key‐fob has not detects any device in 60 seconds, exit copy controller
processandLEDindicatorgoesoff.
[Note:] Key‐fob
keepstheassociateddeviceinassociationcontrolgroups(#2~#4)aftercopydevicetoanewcontroller..
[Note:] Pressandholdon
keyfor2secondsbeforestep3)wouldterminalcopydeviceprocedure.
Addkey‐fobtootherZ‐Wavenetwork
1) Setthemastercontrollerintotheadddevicemode(refertomaincontroller’soperatingmanual).
2) Pressandholdboth and keytogetherfor2secondsuntilLEDindicatorlighton,releaseallkey;
3) Press and hold
key for 2 seconds until LED indicator intermittently flash (light on 3 times in 3 second), key‐fob
startscontrollerlearnmodeforincludetothemastercontrollerasasecondarycontroller;
4) Duringinclusion,LEDindicatorintermittentlyflashuntilinclusionprocesscomplete,LEDlighton3secondnoticeinclusion
is successful. After inclusion successful, key‐fob stays in wakeup state for 30 second in order to receive initial wakeup
configurationfromthemastercontroller.Key‐fobstaysininclusionprocessaround60seconds,iftherenotanycontroller
wasdetected.
[Note:] Key‐fob’slearnmodeis only available as it
hasnotaddedanydevice before or has included inmastercontrolleralready.
Key‐fobalwaysignoresBasicSet/Getcommandrequiresfromothercontroller.
[Note:] Press and hold on
key for 2 seconds after step 3) would terminal procedure if Z‐Wave adding processing has not
started.
Removekey‐fobfromotherZ‐Wavenetwork
1) Setthemastercontrollerintotheexclusiondevicemode(refertomaincontroller’soperatingmanual).
2) Pressandholdboth and keytogetherfor2secondsuntilLEDindicatorlighton,releaseallkey;
3) Press and hold
key for 2 seconds until LED indicator light intermittently flash three times, key‐fob starts
controllerlearnmodeforexcludefromthemastercontroller;
4) During exclusion, LED indicator intermittently flash until exclusion process complete, LED light on 3 second notice
inclusionissuccessful.Key‐fobstaysinexclusionprocess
around15seconds,iftherenotanycontrollerwasdetected.
[Note:] Key‐fob’slearnmodeisonlyavailableasithasnotaddedanydevicebeforeorhasincludedinmastercontrolleralready.
Createassociatedevicetoassociationgroupof#2~#4togetherlocally
1) Pressandholdboth and keytogetherfor2secondsuntilLEDindicatorlighton,releaseallkey;
2) Press
key 3 timesin 2 seconds, LED indicator blink on 1 time interval 3 second (0.5 second on, 3 second off),
key‐fobstartsassociatedeviceprocessing;
To Next Page
Loading...
Need help?
General