4
UK
INTRODUCTION
Thank you for purchasing the Bluetooth® SBS headset. This guide
will help you make the most of this headset.
CONNECTION
To connect the headset to the phone, press and hold the
multifunction key for about 5-8 seconds, or until the LED indicator
blinks with alternate blue and red lights. The headset will
automatically connect to the previously connected smartphone.
When connecting for the first time, activate the Bluetooth® search
on the smartphone and select SBS LADYBUG from the available
devices list.
If required, enter the password 0000.
Connecting a second device:
After successfully connecting the first smartphone, turn it o
and initiate the second phone connection following the same
instructions as the first one.
Turn on the first phone, search for it in the Bluetooth® device list
and select it. Now the headset is connected to both phones.
GENERAL FUNCTIONS
Power On: Press and hold the multifunction key for 4 seconds, the
LED indicator will turn blue for a second.
Power O: Press and hold the multifunction key for 4 seconds, the
LED indicator will flash red for 2 seconds.
Answer a call: when a call comes in, the LED indicator blinks blue.
Press the multifunction key to answer.
End a call: During the call, press the multifunction key.
Last number recall: With the headset in standby mode, press the
multifunction key twice.
Reject a call: When a call comes in, the LED indicator blinks blue.
Press and hold the multifunction key for one second.
Mute yes/no: During a call, press the multifunction key twice.
Switch between headset and phone: during a call, press and hold
for 1 second.
To Next Page
Loading...
