To Next PageTo Next PageWhat to do if Scag Power Equipment Lawn Mower blades are hitting dirt or ground?
If your Scag Power Equipment Lawn Mower is leaving blades hitting dirt or ground very close to the ground, check and adjust tire pressures. Reduce speed to accommodate the conditions. If you are cutting too low on rough terrain, you may need to reduce ground speed, raise the cutting height, or change the direction of cut. Also, avoid cutting wet grass.
How to fix a ridge across the cutting path on my Scag Power Equipment Lawn Mower?
To correct a ridge across the cutting path of your Scag Power Equipment Lawn Mower, check and adjust tire pressure. Also, ensure the deck is level and correctly mounted. If the deck is not level side-to-side, correct it.
Why is my Scag Power Equipment Lawn Mower leaving a wavy or scalloped cut?
If your Scag Power Equipment Lawn Mower is producing a wavy, scalloped, or rough cut, replace the blade if lift is worn from it. Clean any grass accumulation from the deck's underside. Also, adjust the deck pitch and level, and sharpen the blade if it's dull.
How do I fix a ridge in the center of the cutting path with my Scag Power Equipment Lawn Mower?
To resolve a ridge in the center of the cutting path with your Scag Power Equipment Lawn Mower, adjust the pitch and level to ensure blades are mounted evenly and replace the blade if it's bent.
General| Brand | Scag Power Equipment |
|---|---|
| Model | STWC |
| Category | Lawn Mower |
| Language | English |
Lists critical checks and precautions before operating the mower, including operator and area safety.
Provides guidelines for safe operation, including speed, slopes, handling, and general precautions.
Highlights the importance of the ROPS and seat belt for operator safety.
Outlines safety procedures for maintenance, adjustments, and storage to prevent accidents.
Identifies and explains the function of all mower and engine controls and instruments.
Details the safety interlock system preventing engine start or operation under unsafe conditions.
Step-by-step guide for safely starting the engine, including choke and throttle usage.
Explains how to operate steering controls for forward and reverse travel and turning.
Provides safety guidelines and precautions for operating the mower on slopes.
Safety instructions for clearing clogged discharge chutes, warning against using hands.
Identifies common cutting issues, their causes, and recommended cures.
Procedure for adjusting the parking brake linkage to ensure proper engagement.
Instructions for adjusting steering control rods for neutral and tracking alignment.
Guides on adjusting cutter deck level, pitch, and height for optimal cutting performance.
Provides a schedule of recommended maintenance procedures and intervals based on operating hours.
Details lubrication points, intervals, lubricants, and number of places for greasing.
Covers checking hydraulic oil level, changing hydraulic oil, and changing the filter element.
Explains how to check and change engine crankcase oil and oil filter.
Covers blade inspection, sharpening, safety, and replacement procedures.
