Scag Power Equipment SWZ-48V-15FSE User Manual (English)

Questions and Answers:

R
rfreyAug 6, 2025
What to do if Scag Power Equipment Lawn Mower leaves strips of uncut grass?
- W
  weaverjamesAug 6, 2025
  If your Scag Power Equipment Lawn Mower is leaving strips of uncut grass, start by sharpening the mower blades, ensuring they are correctly sharpened. Make sure the engine is running at full RPM and adjust the belt tension if it's slipping. Also, clean any grass accumulation from the underside of the deck. Reduce your ground speed and avoid cutting wet grass. If the blades are bent, replace them.
E
elizabethbradshawAug 13, 2025
Why Scag Power Equipment Lawn Mower leaves an uneven cut on flat ground?
- S
  susan90Aug 13, 2025
  If your Scag Power Equipment Lawn Mower is producing an uneven cut on flat ground, with a wavy or scalloped appearance, replace the blade if the lift is worn. Ensure the blade is mounted correctly with the cutting edge toward the ground. Clean any grass accumulation from the underside of the deck, adjust the deck pitch and level, and sharpen the blade if it's dull. For issues related to deck mounting or a bent spindle area, consult an authorized SCAG dealer.
J
Jacqueline JonesAug 18, 2025
How to prevent uncut grass blades with Scag Power Equipment Lawn Mower?
- W
  William SmithAug 18, 2025
  To address occasional blades of uncut grass when using your Scag Power Equipment Lawn Mower, ensure the engine is running at full RPM. Reduce your ground speed to suit the conditions, and avoid cutting when the grass is wet. Sharpen the mower blades, clean any accumulated grass from the underside of the deck, and adjust the belt tension if it's slipping.
R
Richard BergAug 25, 2025
How to fix sloping ridge across cutting path with Scag Power Equipment Lawn Mower?
- A
  Anna StewartAug 25, 2025
  If your Scag Power Equipment Lawn Mower is leaving a sloping ridge across the width of the cutting path, check and adjust the tire pressure to ensure it is equal on all tires. Also, ensure the wheels are even. For issues related to incorrect deck mounting, or if the deck is not level side-to-side, consult an authorized SCAG dealer and check for level and correct it.
E
Emily MartinezAug 30, 2025
What to do for uneven cut on uneven ground with Scag Power Equipment Lawn Mower?
- C
  Clinton LynchAug 30, 2025
  If your Scag Power Equipment Lawn Mower is producing an uneven cut on uneven ground, you may need to reduce ground speed, raise the cutting height, and/or change the direction of cut.

Scag Power Equipment SWZ-48V-15FSE Specifications

General

Cutting Width	48 inches
Engine Manufacturer	Kawasaki
Deck Type	Fabricated
Transmission	Hydro-Gear
Warranty	3 years
Fuel Capacity	5 gal
Cutting Height	1.5 to 5 inches

Summary

Section 1 - General Information

1.1 Introduction

Overview of the mower and manual's purpose, contact for service.

1.2 Direction Reference

Defines directional terms (Right, Left, Front, Rear) used in the manual.

1.3 Servicing the Engine and Drive Train Components

Outlines scope of manual for engine/drivetrain service, advises dealer contact.

1.4 Symbols

Explains various symbols used in the manual for controls and hazards.

Section 2 - Safety Information

2.1 Introduction

Emphasizes operator safety, training, and responsibility for accidents.

2.2 Signal Words

Explains signal words (DANGER, WARNING, CAUTION) and safety symbols.

2.3 Before Operation Considerations

Pre-operation checks for hydraulic connections and safety advice.

2.4 Testing the Safety Interlock System

Procedures to test the safety interlock system for proper function.

2.5 Operation Considerations

Key points and warnings for safe mower operation, including slopes.

2.6 Maintenance Considerations & Storage

Guidelines for maintenance tasks and proper storage of the mower.

2.7 Using a Spark Arrestor

Information on spark arrestor requirements and regulations.

2.8 Spark Ignition System

Compliance statement for the spark ignition system.

2.9 Safety and Instructional Decals

Displays and explains various safety and instructional decals on the mower.

Section 6 - Adjustments

6.1 Parking Brake Adjustment

Procedure for adjusting the parking brake for proper holding.

6.2 Neutral Adjustment

Procedure for adjusting neutral control for proper tracking.

6.3 Steering Control Rod Adjustments

Adjusting steering control rods for proper neutral engagement.

6.4 Tracking Adjustment

Procedure for adjusting tracking for straight mower travel.

6.5 Throttle Control and Choke Adjustments

Notes dealer adjustment for throttle and choke controls.

6.6 Cutter Deck Belt Adjustments

Procedure for adjusting cutter deck belt tension.

6.7 Belt Alignment

Importance of belt alignment for proper mower performance.

6.8 Adjusting Cutting Height

How to adjust the cutting deck height.

6.9 Electric Clutch Adjustment

Procedure for adjusting the electric clutch air gap.

Section 7 - Maintenance

7.1 Maintenance Chart - Recommended Service Intervals

Schedule of maintenance tasks based on operating hours.

7.2 Lubrication

Lubrication points and intervals for various mower components.

7.3 Hydraulic System

Procedures for checking and changing hydraulic oil and filter.

7.4 Engine Oil

Procedures for checking and changing engine oil and filter.

7.5 Engine Fuel System

Fueling procedures, safety precautions, and tank capacity.

7.6 Engine Air Cleaner

Procedures for cleaning and replacing the air cleaner element.

7.7 Battery - Electric Start Models

Safety and handling guidelines for electric start batteries.

7.8 Cutter Blades

Inspection, sharpening, and replacement of cutter blades.

7.9 Tires

Tire pressure check intervals and specifications.

Section 8 - Illustrated Parts List

8.1 Scag Approved Attachments and Accessories

List of approved attachments and accessories for the mower.

Section 3 - Specifications

3.1 Engine

Engine details: brand, model, displacement, cylinders, fuel, starter.

3.2 Electrical

Electrical components: starter, interlocks, instrument panel.

3.3 Engine Deck

Drive system, hydraulic pumps/motors, steering, controls, wheels.

3.4 Cutter Deck

Cutter deck type, construction, width, blades, discharge, spindles.

3.5 Weights and Dimensions

Physical specifications including length, width, height, and operating weight.

3.6 Productivity

Estimated cutting productivity per day based on width and speed.

Section 4 - Operating Instructions

4.1 Controls and Instrument Identification

Identification and function of mower controls and instruments.

4.2 Safety Interlock System

Description of the mower's safety interlock system.

4.3 Testing the Safety Interlock System

Step-by-step guide to test the safety interlock system.

4.4 Initial Run-in Procedures

Recommended procedures for the first 20 hours of operation.

4.5 Starting the Engine

Step-by-step instructions for starting the engine.

4.6 Ground Travel and Steering

Instructions for forward, reverse, and turning maneuvers.

4.7 Engaging the Deck Drive (Cutter Blades)

Instructions for engaging and disengaging the mower deck.

4.8 Hillside Operation

Safety precautions for operating on slopes.

4.9 Parking the Mower

Steps for safely parking the mower.

4.10 After Operation

Post-operation cleaning and checks.

4.11 Removing Clogged Material

Procedure for safely removing clogged material from the discharge.

4.12 Moving Mower with Engine Stopped

How to move the mower when the engine is off.

4.13 Recommendations for Mowing

Best practices for effective and efficient mowing.

Section 5 - Troubleshooting Cutting Conditions

Related product manuals

Scag Power Equipment SWZ Series

20 pages

WALK-BEHIND SWZ-19KAI

92 pages

Scag Power Equipment SWZT36-14FS

67 pages

Scag Power Equipment SWZT48-15FS

Scag Power Equipment SW-13KH

24 pages

Scag Power Equipment SW36-13KA

28 pages

Scag Power Equipment SW48-14KA

28 pages

Scag Power Equipment SW48V-14FS

53 pages

Scag Power Equipment SWZ-48V-15FSE User Manual

Table of Contents

Questions and Answers:

Scag Power Equipment SWZ-48V-15FSE Specifications

Summary

Section 1 - General Information

1.1 Introduction

1.2 Direction Reference

1.3 Servicing the Engine and Drive Train Components

1.4 Symbols

Section 2 - Safety Information

2.1 Introduction

2.2 Signal Words

2.3 Before Operation Considerations

2.4 Testing the Safety Interlock System

2.5 Operation Considerations

2.6 Maintenance Considerations & Storage

2.7 Using a Spark Arrestor

2.8 Spark Ignition System

2.9 Safety and Instructional Decals

Section 6 - Adjustments

6.1 Parking Brake Adjustment

6.2 Neutral Adjustment

6.3 Steering Control Rod Adjustments

6.4 Tracking Adjustment

6.5 Throttle Control and Choke Adjustments

6.6 Cutter Deck Belt Adjustments

6.7 Belt Alignment

6.8 Adjusting Cutting Height

6.9 Electric Clutch Adjustment

Section 7 - Maintenance

7.1 Maintenance Chart - Recommended Service Intervals

7.2 Lubrication

7.3 Hydraulic System

7.4 Engine Oil

7.5 Engine Fuel System

7.6 Engine Air Cleaner

7.7 Battery - Electric Start Models

7.8 Cutter Blades

7.9 Tires

Section 8 - Illustrated Parts List

8.1 Scag Approved Attachments and Accessories

Section 3 - Specifications

3.1 Engine

3.2 Electrical

3.3 Engine Deck

3.4 Cutter Deck

3.5 Weights and Dimensions

3.6 Productivity

Section 4 - Operating Instructions

4.1 Controls and Instrument Identification

4.2 Safety Interlock System

4.3 Testing the Safety Interlock System

4.4 Initial Run-in Procedures

4.5 Starting the Engine

4.6 Ground Travel and Steering

4.7 Engaging the Deck Drive (Cutter Blades)

4.8 Hillside Operation

4.9 Parking the Mower

4.10 After Operation

4.11 Removing Clogged Material

4.12 Moving Mower with Engine Stopped

4.13 Recommendations for Mowing

Section 5 - Troubleshooting Cutting Conditions

Related product manuals