Scala SC 6360 User Manual

Digital blood pressure monitor SC 6360
for measurements on the upper arm
Operating instructions
Introduction
Thank you very much for your decision to buy the SC 6360
blood pressure monitor. It is most easily operated, as the
settings that were still necessary with older models have
all been taken care of by the electronic programming
(Fuzzy logic). Just press the relevant button and the
measurement can start.
But this instrument has much more uses. In order to utilize
all its options, please read these instructions carefully
before you use the instrument for the first time and keep
them in a safe place for future reference.
Special features of the SC 6360 blood pressure
monitor
♦ The SC 6360 has a special logic for recognizing the
required pumping pressure (Fuzzy logic). If the pumping
pressure set by the manufacturer is insufficient, the
manometer will recognize it and increase the pressure by
further pumping.
♦ The device has 60 memory locations. The date and time
are displayed and stored together with every blood
pressure value. To recall the memory, please press “MEM
Button” under power-off mode first. Then, the average
measurement result will be shown on the LCD first.
♦ You may set 3 different times for the alarm and
measurements.
♦ The instrument switches automatically back into its clock
function 3 min after the blood pressure has been
measured.
3

Scala SC 6360 Specifications

General

Technology	Oscillometric
Irregular Heartbeat Detection	Yes
WHO Indicator	Yes
Type	Upper Arm
Pulse Range	40-200 beats per minute
Accuracy Blood Pressure	±3 mmHg
Accuracy Pulse	±5%
Memory	60 measurements
Average Reading	Yes
Cuff Size	22 - 32 cm

Summary

Introduction

Special Features

Safety Instructions

Operation and Battery Replacement

Device Description

Date and Time Setting

Setting the Alarm Clock

Instructions for Measuring Blood Pressure

The Blood Pressure Measurement

Procedure for placing the cuff and connecting it to the instrument for measurement.

Premature Discontinuation of Measurement

How to stop the blood pressure measurement process at any time.

Memory Recall and Deletion

Memory Recall

Instructions on how to access stored blood pressure readings and averages.

Memory Deletion

Method for clearing all recorded memory data from the device.

Blood Pressure Values

What Blood Pressure Values Are Normal?

Guidance on interpreting blood pressure readings based on WHO recommendations.

Assessment of Blood Pressure Values

Classification of high blood pressure into three degrees of severity.

Care and Maintenance

Technical Standards and Compliance

Warranty Information

Error Messages and Disturbances

Disposal Instructions