■ You can expect 1 to 3 hours for the installation depending on
how many nodes were purchased.
■ For the scheduled HC3 Software system installation day
you’ll need:
■ A monitor and keyboard for physical access during node
configuration and system initialization for the HC3 system.
This typically takes less than 30 minutes for a 3 or 4 node
system.
■ Once initialized, all first-time system configuration and HC3
web interface training can be handled through a web
browser on a machine local to the HC3 nodes. This is
typically the remainder of the installation time.
■ A Windows Operating System ISO file is optional but
recommended for first-time VM creation in the HC3 web
interface with your installation specialist.
○ Install the HC3 System
■ What to Expect
■ Your assigned installation specialist will contact you at the
previously scheduled date and time with the provided
contact number to walk you through the HC3 system
installation.
■ The installation will start with physical access to the HC3
nodes in order to configure the node IPs and initialize the
nodes as a single HC3 system.
■ Once the nodes are initialized the HC3 web interface will be
available through a web browser and the remainder of the
To Next Page
Loading...
