EasyManuals Logo

Scale Mellanox SN2010 User Manual

Scale Mellanox SN2010
12 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #5 background imageLoading...
Page #5 background image
CLI Mode Basics
Configuration for the SN2010 is performed through a CLI interface. As a reference:
> = unprivileged mode
# = privileged mode
(config)# = global configuration mode
(config interface ethernet 1/1)# = interface configuration mode
Upon login you will be in the unprivileged mode. To enter privileged mode:
> enable
#
NOTE
You can use ? to display what commands are available in the current mode.
In order to configure the switch we need to enter global configuration mode. This mode is used for settings that
aren’t specific to the switch ports.
# conf t
(config)#
Configuration of switch ports is performed in interface configuration mode. To return to the previous configuration
level:
(config interface ethernet 1/1)# exit
(config)#
©
Scale Computing 2018 5

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Scale Mellanox SN2010 and is the answer not in the manual?

Scale Mellanox SN2010 Specifications

General IconGeneral
BrandScale
ModelMellanox SN2010
CategorySwitch
LanguageEnglish