EasyManua.ls Logo

Scandalli EWA - EWA Performance Setup; Orchestral, Velocity, Response, and Swell Pedal; Combination Copying

Default Icon
22 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
05 Programming ORCHESTRAL mode
• Press EDIT
• Select 14 to choose BELLOWS LAYER: playing softly on the right, only the sound
of Treble 1 will be heard; pulling hard on the bellows the sound on Treble 2 will
also be heard
• Select 15 to choose BELLOWS CHANGE: playing softly on the right, only the
sound of Treble 1 will be heard; pulling hard on the bellows only the sound on
Treble 2 will be heard
• Select 16 to choose LAYER; both the sound on Treble 1 and the sound on
Treble 2 will be heard with their respective volumes
• Press EDIT again to exit
(NB: this parameter can be stored in a combination)
06 Programming the KEY VELOCITY
• Press EDIT
• Select 24 so that every note ON plays with a key velocity value of 64
• Select 25 so that every note ON plays with a key velocity value of 100
• Press EDIT again to exit
(NB: this parameter can be stored in a combination)
07 Programming the BELLOWS RESPONSE
• Press EDIT
• Select 30 to play with soft bellows: a small movement of the bellows will
produce a notable variation in volume.
• Select 31 to play with medium bellows: a greater movement of the bellows
is needed to produce a notable variation in volume.
• Select 32 to play with hard bellows: a large movement of the bellows is
needed to produce a notable variation in volume.
• Press EDIT again to exit
(NB: this parameter can be stored in a combination)
08 To copy a COMBINATION to another location
• Press the COMBI button and select the combination you wish to duplicate
• Press EDIT
• Select 33
• Press EDIT again
• Select the number of the location where you want the Combination
duplicated
• Press EDIT again to exit and store the setting
09 Programming the SWELL PEDAL
• Press EDIT
• Select 20 – the swell pedal will control the overall volume
• Select 21 – the swell pedal will control the volume of the treble section
• Select 22 – the swell pedal will control the pitch bend UP of Treble 1
• Select 23 – the swell pedal will control the pitch bend DOWN of Treble 1
• Press EDIT again to exit and store the setting
(NB: this parameter can be stored in a combination)