Scandalli EWA - EWA Pedal Functions; Switch Pedal Programming

10 Programming the functions of SWITCH PEDAL 1
• Press EDIT
• Select 35 – the SWITCH PEDAL will control the MODULATION of Treble 1
• Select 36 – the SWITCH PEDAL will control the overall SUSTAIN
(HOLD – control change 64)
• Select 37 – the SWITCH PEDAL will control the SUSTAIN (HOLD – cc 64)
of Treble 1 and Treble 2
• Select 39 – the SWITCH PEDAL will control the GLIDE UP of Treble 1
• Select 40 – the SWITCH PEDAL will control the GLIDE DOWN of Treble 1
• Select 41 – to assign note C1 of midi channel 16 to SWITCH PEDAL 1
• Select 42 – press edit again, select the number of the desired sound
to assign to parameter 41 Press EDIT again to exit and store the setting
(NB: this parameter can be stored in a combination)
11 Programming the functions of SWITCH PEDAL 2
• Press EDIT
• Select 50 – the SWITCH PEDAL will control the MODULATION of Treble 1
• Select 51 – the SWITCH PEDAL will control the overall SUSTAIN
(HOLD – cc 64)
• Select 52 – the SWITCH PEDAL will control the SUSTAIN (HOLD – cc 64)
of Treble 1 and Treble 2
• Select 54 – the SWITCH PEDAL will control the GLIDE UP of Treble 1
• Select 55 – the SWITCH PEDAL control the GLIDE DOWN of Treble 1
• Select 56 – to assign note C1 of midi channel 16 to SWITCH PEDAL 2
• Select 57 – press edit again, select the number of the desired sound
to assign to parameter 56
• Press EDIT again to exit and store the setting
(NB: this parameter can be stored in a combination)
12 Programming the functions of SWITCH PEDAL 3
• Press EDIT
• Select 65 – the SWITCH PEDAL will control the MODULATION of Treble 1
• Select 66 – the SWITCH PEDAL will control the overall SUSTAIN
(HOLD – cc 64)
• Select 67 – the SWITCH PEDAL will control the SUSTAIN (HOLD – cc 64)
of Treble 1 and Treble 2
• Select 69 – the SWITCH PEDAL will control the GLIDE UP of Treble 1
• Select 70 – the SWITCH PEDAL will control the GLIDE DOWN of Treble 1
• Select 71 – to assign note C1 of midi channel 16 to SWITCH PEDAL 3
• Select 72 – press edit again, select the number of the desired sound
to assign to parameter 71
• Press EDIT again to exit and store the setting
(NB: this parameter can be stored in a combination)