Scandium SCRH60 - User Manual

Questions and Answers

B
brian30Aug 11, 2025
Why my Scandium SCRH60 does not work?
- D
  David StephensAug 11, 2025
  If your Scandium Ventilation Hood isn't working, several things could be the cause. First, check the electrical connection to ensure the voltage is between 220-240V, the hood is connected to a grounded plug, and it's switched on. Next, verify the motor switch is on and receiving power. Also, make sure the outlet is open and not blocked. Check the lamps and fuse to ensure they are not broken or faulty. Ensure there are no obstructions in the ducting or back draft fans. Finally, confirm the outlet isn't blocked and the correct diameter ducting is installed.
V
vincentwarrenAug 19, 2025
Why is the air suction weak in my Scandium Ventilation Hood?
- A
  Alexis BrownAug 19, 2025
  If the air suction in your Scandium Ventilation Hood is weak, consider the following: Regularly wash the metal filters. Ensure the outlet is open and not blocked. Verify there are no obstructions in the ducting or back draft fans. Also, check that the outlet isn't blocked and the correct diameter ducting is installed.
W
Willie GreeneAug 27, 2025
What to do if my Scandium SCRH60 Ventilation Hood does not expel air?
- A
  Ashley YoderAug 27, 2025
  If your Scandium Ventilation Hood isn't expelling air, regularly wash the metal filters. Also, check that the outlet isn't blocked and the correct diameter ducting is installed.
A
Alyssa SteeleSep 2, 2025
Why Scandium Ventilation Hood lights do not work?
- T
  Terry CruzSep 2, 2025
  If the lights on your Scandium Ventilation Hood aren't working, check that the lamp switch is in the 'on' position. Also, ensure the lamps are firmly in place.

Scandium SCRH60 Specifications

General

Brand	Scandium
Model	SCRH60
Category	Ventilation Hood
Language	English

Scandium SCRH60 - User Manual

Table of Contents

Questions and Answers

Scandium SCRH60 Specifications