Page 5 (8)
The OBD cable connector for the VCI side.
The OBD cable plug for the VCI side has a guide rail for correct insertion.
Safety
The operator and operating personnel are responsible for the intended and legal use of VCI4.
• Modifications, conversions or other actions on the VCI4 are not permitted.
• VCI4 is only intended for maintenance of vehicles. It is used for vehicle diagnostics in
workshops, production, plants and warehouses.
• Repairs may only be carried out by authorised personnel. Only use the correct and approved
materials.
• The general safety regulations for work on electrical power must be complied with.
Special safety instructions
CAUTION!
Risk of electric shock
• Do not perform repair or modifications to electrical systems, components or cables.
• Repairs may only be carried out by qualified personnel.
• In case of electric shock, contact a physician immediately and seek medical care for observation.
CAUTION!
• Incorrectly performed maintenance work can reduce the safety of the unit and cause serious
personal injury.
• Only authorised and trained personnel can perform maintenance work.
CAUTION!
Risk of burns.
During operation, component surfaces may become hot. Contact with them may result in burns.
To Next Page
Loading...