SCANMASKIN SCAN COMBIFLEX 650

Questions and Answers

O
Omar NelsonAug 15, 2025
How to troubleshoot if SCANMASKIN SCAN COMBIFLEX 650 Floor Machine won't start?
- M
  michael79Aug 15, 2025
  If your SCANMASKIN Floor Machine won’t start, here are a few things to check: * First, check the worksite fuse box for any power failures. Inspect the cables and measure that all three phases are present and at full voltage near the machine. * Ensure that the emergency stop button is not depressed. If it is, release it. * In case of an internal error, read the alarm or fault code on the display inside the electrical cabinet. Alarm codes are formatted as “Axxxx” and fault codes as “Fxxxx”. Then, contact Scanmaskin Sweden AB.
K
Kenneth RobertsAug 18, 2025
What to do if SCANMASKIN SCAN COMBIFLEX 650 is weak?
- J
  Joshua WhiteAug 18, 2025
  If your SCANMASKIN Floor Machine is weak and might stop when on the ground, it could be due to a missing phase or a voltage drop. Here’s what to do: * Check the display on the inverter for any alarm codes. * Inspect the fuses in the worksite fuse box and cables. * Measure that all three phases are present and at full voltage at the cable end near the machine. * Ensure the cable isn't too long; if it is, use a higher-rated cable to a distribution box nearer the machine.
K
Karen MartinezAug 22, 2025
What to do if SCANMASKIN SCAN COMBIFLEX 650 Floor Machine shows A2001 Over current?
- W
  William HigginsAug 22, 2025
  If your SCANMASKIN Floor Machine is showing an A2001 Over current error, it could be due to a missing phase, voltage drop, or high environmental temperature. Try the following: * Inspect the fuses and cables in the worksite fuse box, ensuring all three phases are present and at full voltage at the cable end near the machine. If the cable is too long, replace it with a higher-rated cable to a closer distribution box. * Check the ventilation fans and filters to the fans, especially if the temperature is above 40°C (104°F).
C
Corey Allen Jr.Aug 25, 2025
Why does SCANMASKIN SCAN COMBIFLEX 650 vibrate a lot?
- S
  Sherri JacksonAug 25, 2025
  If your SCANMASKIN Floor Machine vibrates a lot, it could be due to the grinding speed being too high or damaged tools. Try the following: * Lower the grinding speed. * Inspect the tools and change them if needed.
T
Tammy BurgessAug 28, 2025
What does A2009 Over temperature mean on SCANMASKIN Floor Machine?
- R
  Richard SmithAug 28, 2025
  If the SCANMASKIN Floor Machine displays an A2009 Over temperature error, this means the internal temperature in the inverter is above 120°C (248°F), possibly due to ventilation issues in the electrical cabinet. You should: * Inspect the ventilation fans. * Inspect the filters to the fans. Then, contact Scanmaskin Sweden AB.
J
Jennifer ThomasAug 31, 2025
What does A2006 Speed reference error mean for SCANMASKIN Floor Machine?
- J
  Jessica WilsonAug 31, 2025
  If your SCANMASKIN Floor Machine displays an A2006 Speed reference error, the potentiometer on the control panel might be damaged. Inspect the potentiometer and replace it if necessary.
K
kimberlywelchSep 4, 2025
What does error F0004 Short circuit in motor mean on SCANMASKIN SCAN COMBIFLEX 650 Floor Machine?
- F
  farleyshawnSep 4, 2025
  If your SCANMASKIN Floor Machine shows an F0004 Short circuit in motor error, it could be due to damage to the motor cable or the motor itself. Inspect the motor cable and the motor connection, then contact Scanmaskin Sweden AB.
N
Natasha MccoySep 7, 2025
What does error F0016 Protective earth failure mean on SCANMASKIN SCAN COMBIFLEX 650?
- D
  dana85Sep 7, 2025
  If your SCANMASKIN Floor Machine displays an F0016 Protective earth failure error, it could be due to a damaged motor cable, a damaged motor, or water entering the motor. Inspect the motor cable and motor connection, then contact Scanmaskin Sweden AB.
J
Joseph WalkerSep 12, 2025
What does error F0034 Motor phase fault mean on SCANMASKIN Floor Machine?
- D
  David AdamsSep 12, 2025
  If your SCANMASKIN Floor Machine shows an F0034 Motor phase fault, one of the three phases to the motor might be missing, possibly due to damage to the motor cable or the motor itself. Inspect the motor cable and the motor connection, then contact Scanmaskin Sweden AB.

Summary

Important Information

Product Specifications

Electrical Specifications

Details electrical requirements and ratings for the machine.

Mechanical Specifications

Covers physical dimensions, weight, and performance parameters.

Product Options

Lists available optional features, such as water supply.

Grinding Tools

Information on approved tools and how they are fitted.

Range of Application

Defines the intended uses and surfaces for the machine.

Scope of Supply

Lists the items included with the standard grinding machine.

Machine Overview

Provides a visual breakdown of machine parts with references.

Safety Regulations

Safety Legend

Explains symbols used for safety warnings and hazards.

General Safety Precautions

Essential safety measures for operating the machine.

Organizational Safety Measures

Procedures and responsibilities for safe operation and personnel.

Personnel Qualification

Requirements for operators and personnel involved with the machine.

Safe Operation Guidelines

Specific safety rules for operating the grinding machine.

Electrical Safety

Guidelines and precautions for electrical connections and safety.

Cable Safety

Specific safety instructions for using power and extension cables.

Generator Usage Safety

Safety requirements when operating the machine with a generator.

Safety Off Position

Explanation and procedure for putting the machine in a safe state.

Maintenance Safety

Safety procedures to take before performing maintenance tasks.

Transport Safety

Safety guidelines for transporting the machine.

Securing Inside Vehicles

Instructions for safely securing the machine within a vehicle.

Transporting the Machine

Transport Precautions

General advice before starting the transport process.

Manual Transport

Steps for moving the machine manually.

Lifting Procedures

Guidelines and safety for lifting the machine.

Securing in Vehicles

Procedures for securing the machine when transported inside vehicles.

Machine Operation

Operation Precautions

Essential safety measures before and during machine operation.

Operating the Machine

Step-by-step instructions for operating the grinding machine.

Control Panel Overview

Description of the machine's control panel components and functions.

Water Connection

Details on how to connect and use the water supply system.

Machine Start-up

Procedure for safely starting the grinding machine.

Machine Stop Procedure

Instructions for safely stopping the grinding machine.

Adjusting Grinding Speed

How to adjust the machine's grinding speed settings.

Changing Grinding Direction

Instructions for changing the direction of grinding.

Safety Off Position

Procedure for placing the machine in a safe state for maintenance.

Grinding Process

Reference to grinding instructions and information.

Changing Grinding Tools

Step-by-step guide on how to replace grinding tools.

Using with a Generator

Guidelines for operating the machine with a generator.

Machine Maintenance

Maintenance Precautions

Safety measures to take before performing maintenance tasks.

Daily Inspection

Daily checks to perform before operating the machine.

Maintenance Schedule

A list of maintenance tasks and their required intervals.

Grinding Disc Replacement

Instructions for replacing or assembling grinding discs.

Cleaning the Machine

Procedures for cleaning the grinding machine safely.

Troubleshooting

Common Faults

Identifies common issues and their potential causes and corrections.

Error Codes

Lists error codes, descriptions, causes, and recommended corrections.

Spare Parts

Gear Barrel Components

Exploded view and parts list for the gear barrel assembly.

Center Axis Components

Exploded view and parts list for the center axis assembly.

Grinding Spindle Components

Exploded view and parts list for the grinding spindle assembly.

Grinding Head Components

Exploded view and parts list for the grinding head assembly.

Electrical Schematics

Diagrams illustrating the electrical connections and components of the machine.

Product Warranty

EU Declaration of Conformity

Alphabetical Reference

Contact Information