28
there are several different types of contact wheels, with varying softness and shape for
different purposes.
5.8. Using the belt arm
Grinding by the belt arm can be made on the contact wheel or on the surface grinding
table, it is also possible to remove surface grinding table and thereby grind freely on the
grinding belt. Lead the issue calmly toward the grinding belt and avoid harsh jerky
pressure or blows, always use a light firm pressure, to avoid destroying the grinding belt
and overloading the engine.
6. WIRING DIAGRAMS
6.1. Diagram 3x400V
6.2. Diagram 1x230V
To Next Page
Loading...
