ScentAir ScentWave 1004

To Next Page

ScentWave 1004 Troubleshooting Guide Tier #1

Q: How do I adjust the fragrance level? (Smell is too strong or too weak)

A: Use the “+” (plus) and “-“ (minus) buttons to adjust to your desired fragrance level.

Q: How do I adjust the time?

A: 1) Press the “Clock” button.

2) Screen will display the time.

3) Press and hold “Clock” button for 2 seconds.

4) Hours will be flashing. Use “+” (plus) and “-“ (minus) buttons to adjust the hours.

5) Press the “Next Digit” button. Minutes will be flashing, use to adjust

minutes.

6) Press the “check” button to confirm and return to main screeen.

Q: How do I adjust the date?

A: 1) Press the “Clock” button twice.

2) Screen will display the date.

3) Press and hold “Clock” button for 2 seconds.

4) The year will be flashing. Use “+” (plus) and “-“ (minus) buttons to adjust the year.

5) Press the “Next Digit” button. The month will be flashing, use to adjust

month.

6) Press the “Next Digit” button. The day will be flashing, use to adjust

days.

7) Press the “check” button to confirm and return to main screeen.

Need help?

Do you have a question about the ScentAir ScentWave 1004 and is the answer not in the manual?

Summary

How to Adjust Fragrance Level

Adjust Fragrance with +;- Buttons

How to Adjust Time

Initiate Time Adjustment

Press and hold the Clock button for 2 seconds to access time adjustment mode.

Adjust Hours

Hours will flash; use plus and minus buttons to set the correct hour.

Adjust Minutes

Confirm Time Setting

How to Adjust Date

Initiate Date Adjustment

Adjust Year

Adjust Month

Adjust Day

Confirm Date Setting

How to Create an Event

Set Event Start Time and Hours

Press Event Settings, then use +/- buttons to adjust the event start hours.

Set Event Minutes

Press Next Digit, then use +/- buttons to adjust the event minutes.

Set Event Days of Week

Press Next Digit; days of the week will flash for selection.

Complete Event Setup

Finalize event by pressing Next Digit or Event Settings, then Check to return home.

How to Delete an Event

Access Event for Deletion

Confirm Event Deletion