- 18 -
www.SCEPTRE.com
SCEPTRE E245 Series LED HDTV User Manual
Connecting Cable Box with Component YPbPr…
1. Make sure the power of HDTV and your DVD player is turned off.
2. Obtain a Component Cable. Connect the green color connector to both your
DVD player and YPbPr’s green connector port on the back of your HDTV.
3. Connect the blue color connector to both your DVD player and YPbPr’s blue
connector port on the back of your HDTV.
4. Connect the red color connector to both your DVD player and YPbPr’s red
connector port on the back of your HDTV.
5. Obtain a RCA Audio Cable. Connect the white color connector to both your
DVD player and YPbPr’s white connector port on the back of your HDTV.
6. Connect the red color connector to both your DVD player and YPbPr’s red
connector port on the back of your HDTV.
7. Turn on the HDTV and your DVD player.
8. Use the remote control’s source button or the source button on the TV to
switch to YPbPr.
Please Note :
• Please reference the set-top box’s manual, to make sure the set-
top box is configured to output correctly to the TV.
• Sceptre’s HDTV supports SONY’s universal remote code.
Please look up SONY’s codes in your universal remote’s hand
book.
To Next Page
Loading...
Need help?
General
