To Next PageTo Next Page
Need help?Do you have a question about the Schacht FL3109 and is the answer not in the manual?
Lists all components included with the Schacht Standard Floor Loom.
Details the tools necessary for assembly and adjustments.
Instructions for extending the back beam from its folded position.
Guide to installing the warp beam crank handle assembly.
Steps to properly adjust the loom's friction brake system for tension control.
Explains how to engage the brake release hold for winding operations.
Method for securing apron bars using cords on the cloth and warp beams.
Detailed process for inserting heddles into the loom's shaft frames.
Procedure for detaching shafts from the castle on high castle loom models.
Steps for connecting tie-up cords to lamms and treadles.
Instructions for setting the optimal height of the loom's beater.
Information on mounting a lamp to the high castle loom structure.
Optional attachment for facilitating sectional warping on the loom.
Accessory allowing the use of two back beams for different warp setups.
Device used to maintain consistent tension during sectional warping.
Ergonomic seating solution with integrated storage for loom accessories.
Storage unit designed for organizing spools used in sectional warping.
General
