Need help?Do you have a question about the Schacht WOLF PUP LOOM and is the answer not in the manual?
Provides essential preparatory information and guidance for assembling the Wolf looms, including video recommendations.
Catalog of all components and hardware included with the Wolf Pup looms for assembly.
Step-by-step instructions on how to safely unfold the loom from its shipping configuration.
Detailed steps for attaching the beater pegs to the loom, ensuring proper alignment and security.
Instructions for attaching the front beam extension to enhance the loom's functionality.
Guide for securely attaching the warp beam crank handle for easy warp beam rotation.
Procedure for attaching the apron bars to the warp and cloth beams using provided cords.
Instructions for threading heddles onto heddle bars and positioning them on the shaft frames.
Specific instructions for the Wolf Pup LT model on how to install tie-up cords to the lamms and treadles.
Steps for attaching the optional stroller wheels to the rear leg brace of the loom.
Guide for inserting the treadle tracker into the rear castle cross brace for loom operation.
Explanation of the beater pin's function for holding the beater upright during warping.
Instructions on how to remove and reattach the back beam for improved access during threading.
Guidance on adjusting the friction brake tension using the eye bolt for controlled warp winding.
Steps to safely fold the loom, ensuring treadles do not drag on the floor.
Overview of optional accessories available for the Wolf Pup and Wolf Pup LT looms.
To Next Page
General
