– 3 –
Thank you for choosing the Ladybug
spinning wheel. We hope you will have
many pleasurable years together creating
wonderful yarn.
Please DO read the instructions, even
if you usually skip this step. Happy
spinning!
WHERE’S MY LADYBUG?
Somewhere on your Ladybug spinning
wheel, you’ll nd your very own ladybug.
She’s there cheering you on, going to
spin-ins with you, or just keeping you
company as you spin quietly at home.
Because we’ve put the ladybug in a
different place on every wheel, no other
wheel in the world will be exactly like
yours.
UNPACKING YOUR WHEEL
1. Remove the accessory box.
2. Remove the treadle assembly from
the main box: tip the wheel back to
allow the treadle assembly to slide past.
Remove packing materials from the
treadle assembly.
3. Lift the wheel straight up and out of
the box.
4. Remove any remaining packing
material from the wheel.
Be careful not to cut the drive band
or Scotch tension brake band when
removing plastic wrap from the
wheel.
CONTENTS
Main box:
treadle assembly
spinning wheel, with poly drive band installed and fast whorl attached at the back
Accessory box:
yer, assembled with travel bobbin and medium whorl
orice hook
cotton drive band for double-drive spinning
2X travel bobbins
1X 2" Phillips truss head machine screw
2X 5/16-25 x 7/8" hex bolts
4X 1/4" USS washers
2X 5/16" split lock washer
TOOLS REQUIRED
#2 Phillips screwdriver
slotted (at) screwdriver
1/2" wrench
LADYBUG SPINNING WHEEL
TM
Assembly, mAintenAnce & WArrAnty
To Next Page
Loading...
