Schaefer WayCool User Manual

Portable Evaporative Cooler
Designated Hazardous Location
USER'S MANUAL
Certified for Class I, Division 2, Group D
Class II, Groups F & G & Class III
Hazardous (Classified) Locations
Class I: Hazardous location is one in which
flammable gases or vapors may be present in the
air in sufficient quantities to be explosive or
ignitable.
Class II: Are those areas made hazardous by the
presence of combustible dust.
Class III: Are areas where there are easily-
ignitable fibers or flyings present, due to the types
of materials being handled, stored, or processed.
Division 2: Not normally present in an explosive
concentration (but may accidentally exist).
Testing/Certifications Standards: Electrical
Equipment for Use in Class I and Class II, Division 2 and
Class III Hazardous (Classified) Locations.
[UL 1604, Third Edition, October 6, 1995, Including:
Bulletins dated 3/22/95 & 5/17/96]
Non-Incendive Electrical Equipment for Use in Class
I, Division 2 Hazardous Locations [CSA C22.2 No. 213-
M1987]
Electrical Fans [UL-507, Ninth Edition, 9/24/01 and
Fans and Ventilators [CSA C22.2 No. 113-M1989. Sixth
Edition]
ETL certified for United States and Canada

Schaefer WayCool Specifications

General

Brand	Schaefer
Model	WayCool
Category	Air Cleaner
Language	English

Summary

Safety Information

Following Safety Instructions

Advises users to read all safety messages and maintain decals for safe operation.

Safety Recommendations

General Safety Precautions

Covers essential safety guidelines for electrical operation, maintenance, and unit usage.

WC-1HP-DHL Specifications

WC-1HP-DHL Unit Description

Water Supply System

Continuous Water Supply

Pump, Filters, and Piping

Cooling Pad Assembly

Cooling Pad Functionality

Blower and Ductwork

Blower, Motor, and Belt System

Controls

Control Switch Functions

Explains the operation of the manual motor starter and pump selector switches.

Operation & Maintenance

Unit Placement and Airflow Strategy

Unpacking and Initial Setup

Step-by-step instructions for unpacking and setting up the evaporative cooler.

Regular Cleaning Procedures

Details the steps for regularly cleaning the unit and its components.

Normal Startup Process

Outlines the correct steps for starting the unit for normal cooling operation.

Normal Shutdown Process

Explains the proper steps for shutting down the unit after use to maximize pad life.

Troubleshooting

Cooling Pads Not Wetting

Troubleshooting steps for when cooling pads fail to get wet.

Foaming in the Water System

Line Clogs and Obstructions

Instructions to clear blockages in water pipes for optimal flow.

Splattering and Leaking

Warranty

Warranty Coverage and Exclusions

Details what the product warranty covers and what specific conditions are excluded.