Schaudt DT 220 B User Manual

Issued: 30.06.2006
E Schaudt GmbH, E lektrotechnik und Apparatebau, Daimlerstraße 5, 88677 Markdorf, Germany, Tel. + 49 7544 9577-0, Fax +49 7544 9577-29, www.schaudt--gmbh.de
830.588 BA / EN
Instruction manual
Control and Switch Panel DT 220 B
Table of contents
1 Introduction 2............................................
2 Safety information 2......................................
2.1 Significance of the warning signs 2..........................
2.2 General safety instructions 2...............................
3 Application and function 3.................................
4Design 5................................................
5 Operation 5..............................................
5.1 Operating controls 5......................................
5.2 Display controls 6........................................
5.3 Reactivation (following shutdown) 9.........................
5.4 Switching on 10...........................................
5.5 Display menus 15.........................................
5.6 T roubleshooting and remedies 21............................
5.7 Switching off 25...........................................
5.8 Closing down the system 25................................
6 Maintenance 26...........................................
Appendix 27..............................................

Schaudt DT 220 B Specifications

General

Brand	Schaudt
Model	DT 220 B
Category	Control Panel
Language	English

Summary

Introduction

Safety Information

2.1 Significance of Warning Signs

Explains the meaning and implications of different warning symbols used in the manual.

2.2 General Safety Instructions

Provides essential guidelines for safe handling and operation of the device.

Application and Function

Onboard Power Supply System

Illustrates the system architecture and the role of the control panel.

Design

Control and Switch Panel Design

Details the physical layout and components of the DT 220 B panel.

Operation

5.1 Operating Controls

Identifies and explains the function of each button and switch on the panel.

5.2 Display Controls

Describes the different sections and symbols on the display.

5.3 Reactivation (Following Shutdown)

Explains how to restart the system after it has been powered down.

5.4 Switching On

Guides the user through the process of powering up the 12V supply and its loads.

5.4.2 Setting up

Explains how to access and use the setup menus for various configurations.

5.5 Display Menus

Details various information displays like main, battery, and tank menus.

5.5.1 Main Menu

Explains how to navigate and view information in the main menu.

5.5.2 Battery Menu

Details how to access and interpret battery status information.

5.5.2.4 Solar Current

Details how solar charging current is displayed when available.

5.5.2.5 Battery Monitor

Explains the function of the battery monitor and its low voltage protection.

5.5.3 Tank Menu

Explains how to access and view water and waste water tank levels.

Troubleshooting and Remedies

5.6.1 Alarms

Lists common alarms, their causes, and remedies.

5.6.2 Faults

Provides solutions for common system faults and issues.

5.6.3 Check the software version (SW vers.)

Guides on how to determine the installed software version.

Switching Off

Closing Down the System

5.8.1 Closing Down for up to 6 Months

Instructions for preparing the system for short-term storage.

5.8.2 Closing Down for more than 6 Months

Instructions for preparing the system for long-term storage.

Maintenance

Cleaning

Provides instructions for cleaning the control and switch panel.

Tank Sensors/Tank Probes

Advises on cleaning and maintaining tank sensors and probes.

Appendix

A EU Conformity Declaration

States compliance with relevant EU regulations for electromagnetic compatibility.

B Special Fittings/Accessories

Lists available accessories and fittings for tank monitoring.

C Customer Service

Provides contact information and opening hours for customer support.

D Fault Report

A form to be filled out when reporting a defective device.

E Block Circuit Diagram/Connection Diagram

Illustrates the electrical connections and block diagram of the panel.