Schaudt Electrobloc EBL 208 S G User Manual

© 2018 Schaudt GmbH, Elektrotechnik & Apparatebau, Planckstraße 8, D-88677 Markdorf, Phone +49 7544 9577-0, Fax +49 7544 9577-29, www.schaudt-gmbh.de
8110600 BA / EN Edition: 20.11.2018
0 Instruction Ma nual Electrobloc EBL 208 S G
Instruction manual
Electrobloc EBL 208 S G
Table of contents
1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
2 Safety information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
3 Description and appropriate use . . . . . . . . . . . . . . . . . . . . . . . . . . 3
4 Suitable accessories (not supplied) . . . . . . . . . . . . . . . . . . . . . . . 4
5 Technical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
6 Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
7 Maintenance. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
8 Shutting down the system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
9 Changing the battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
10 Technical faults, possible causes and remedies . . . . . . . . . . . . . .9
11 Customer service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
12 Block diagram - for specialist workshop only . . . . . . . . . . . . . . . . 11
13 Fault report. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Schaudt Electrobloc EBL 208 S G Specifications

General

Battery Voltage	12 V
Input Voltage	230V AC
Output Voltage	12 V
Battery Type	Lead-acid
Protection	Overload, short-circuit, reverse polarity

Summary

Introduction

Safety Information

General Warning Symbols

Explains the meaning of warning symbols for persons, damage, and recommendations.

Electrical System Safety Rules

Covers regulations, modifications, connection safety, and shock prevention.

Fuse Handling and Replacement

Details safe practices for fuse replacement, bridging, and zero-current conditions.

Operational and Battery Hazards

Addresses risks like heat, explosion, incorrect settings, and connection issues.

Description and Appropriate Use

System Components Overview

Lists the key components of the Electrobloc EBL 208 SG system.

Suitable Accessories

Technical Data

Operation

Operating Controls Overview

Details the functions of various operating controls like fuses and switches.

Battery Cut-off Switch Function

Explains the function and operation of the battery cut-off switch.

Battery Selector Switch Settings

Details correct setting for battery types and potential hazards.

12V Main Switch Operation

Describes the function of the 12V main switch on the control panel.

Additional Operational Functions

Covers auxiliary functions like awning light and refrigerator operation.

Battery Monitor Functionality

Explains the battery monitor and automatic disconnector function.

Maintenance

Cleaning Instructions

Provides instructions for cleaning the Electrobloc unit.

Shutting Down the System

Disconnecting Living Area Battery

Steps to disconnect the living area battery for long-term storage.

Changing the Battery

Battery Replacement Procedure

Details the process and precautions for changing batteries.

System Startup After Battery Change

Steps to follow after battery installation or reconnection.

Technical Faults, Possible Causes and Remedies

Customer Service

Customer Service Contact Information

Provides contact details for Schaudt GmbH customer service.

Returning a Defective Device

Instructions for returning a defective device for repair.

Block Diagram

Fault Report