Operating Instruction Manual of Energy Management System
EBL 208 S, Art.-No. 911.470 Seite 1 / 7
note: operating instruction manual is intended for the owner and has to come with the EBL
Schaudt GmbH - Elektrotechnik & App.-bau - 88677 Markdorf - Germany 13.12.2001
Contents
1. Description
2. Safety Information
3. Operating Instructions
4. Transport, Storage, Installation
5. Electrical Installation
6. Power-Up, Shut-Down, Maintenance
7. Malfunctions
8. Enclosure
1. Description
The energy system EBL208 S contains the charging module LAS 1216, the battery monitor module
BW 208, the complete 12V distribution, fused 12V circuits, a connector for a solar regulator and
additional control and monitoring devices.
The charging unit is designed as a primary controlled switch-mode power supply.
This modern design ensures high power output with compact dimensions and light weight.
To operate the energy system and to control the living-area functions including accessories
an instrument panel is compulsory.
1.1 Suitable Accessories (not supplied)
control and switch panel instrument panel IT 204
solar regulator LR 1214, art.no 922.202, for solar modules with a total maximum
current of 14A, with 3-p connector and a connecting cable 0.5m.
1.2 Technical Data
1.2.1 General Data
sizes (h x w x d in mm) 130 x 275 x 170 incl. mounting sockets
weight 1.8 kg
cabinet PA (Polyamid), gentian blue RAL 5010
frontpanel aluminium, powder painted, light grey RAL 7035
1.2.2 Electrical Data
mains supply * 230V (+ 10 / - 15%), 47 - 63Hz, safety class 1
power consumption * 280W
suitable batteries * 6 cell lead-acid or lead-gel batteries, more than 55Ah
steady load off * without mains supply, battery alarm 'OFF', a battery voltage
living-area battery of 12.6V and with IT 204: 0.6mA
load current of alternator's * approx 0.4A without load at D+ terminal,
D+ output by EBL see schematic diagram
permissable load... * maximum current draw up to the fuse rating of each output,
...on 12V outputs see enclosed schematic diagram
...anti-freeze valve * max 0.1A
...D+ terminal * 1A, with D+ input fused by 2A.
To Next Page
Need help?
General
