Schaudt Electrobloc EBL 99 K Series User Manual

Date: 20.01.2010
E Schaudt GmbH, Elektrotechnik und Apparatebau, Planckstraße 8 88677 Markdorf, Germany, Tel. +49 7544 9577-0, Fax +49 7544 9577-29, www.schaudt--gmbh.de
811.419 BA / EN
Instruction Manual
Electrobloc EBL 99 K
EBL 99 K with OVP
Table of contents
1Safetyinformation 2......................................
1.1 Meaning of safety symbols 2...............................
1.2 General safety information 2...............................
2 Introduction 3............................................
3Operation 3..............................................
3.1 Starting up the System 3..................................
3.2 Changing the Battery 4....................................
3.3 System F aults 5..........................................
3.4 Closing down the System 6................................
4 Application and Functions in Detail 7........................
4.1 Battery Functions 8.......................................
4.2 Additional Functions 9.....................................
5 Maintenance 9...........................................
Appendix 10..............................................

Schaudt Electrobloc EBL 99 K Series Specifications

General

Input Voltage	230V AC
Output Voltage	12V DC
Charging Current	18A
Battery Type	Lead-acid
Protection Class	IP20

Summary

Safety Information

Meaning of safety symbols

Explains warning symbols like DANGER, WARNING, and ATTENTION for user safety.

General safety information

Outlines critical safety instructions for operating the device and preventing hazards.

Introduction

Operation

Starting up the System

Details the steps and precautions required to safely power on the electrobloc system.

Changing the battery

Provides instructions and warnings for replacing the vehicle's battery.

System faults

Offers a troubleshooting guide for common system errors and their solutions.

Closing down the system

Explains the correct procedure for safely shutting down and disconnecting the system.

Application and Functions in Detail

Battery Functions

Describes supported battery types, charging methods, and isolation features.

Additional Functions

Covers supplementary features like refrigerator control and starter battery charging.

Maintenance

Appendix

EC Declaration of Conformity

Confirms the device's compliance with relevant European Union directives.

Special fittings/accessories

Lists recommended accessories and compatible components for the system.

Customer service

Provides contact information and support hours for customer assistance.

Fault report

Design

Block diagram/connection diagram