Schaudt LR 1218 - 6 Initial Use; Checks Prior to Initial Use; 7 Technical Data; Mechanical Data

Installation instructions for solar charge regulator LR 1218
10
Date: 22.09.2009 822.212 MA / EN
6 Initial use
6.1 Checks prior to initial use
" Ensure that all the connections are correct (only for initial use).
" Ensure that the batteries or the electrobloc are connected (depending on
operating mode).
" If the solar charge regulator is connected to an electrobloc, ensure the
battery cut-off switch is enabled.
" Connect the solar module to the solar charge regulator with the correct
polarity. The solar charge regulator is ready to use.
7 Techn ical data
7.1 Mechanical data
56 x 75 x 110 (H x W x D in mm), including attachment feet
160 g
Plastic, black
Aluminium, powder coated, gentian blue RAL 5010
Before starting up
Starting up the system
Dimensions
Weight
Housing
Base plate