1716
GB
Notes
After a power failure, the settings will be permanently retained� As soon as the
supply of power returns, the opening and closing times will be processed again�
Setting the new opening and closing times�
Only use the product with roller shutter belts with the dimensions indicated in the
„Technical data“ table� Wrong shutter belt lengths and widths will result in dama-
ge� Replace the old shutter belt when the requirements are not met�
Caution: regularly check the paneling as well as the belt for their awless con-
dition� In case of risk, decommission the system and have repairs executed by a
specialist�
Note: since the belt pulley in the roller shutter box loses its rigidity due to aging,
we recommend checking and if necessary replacing it after a prolonged usage
time�
If the maximum motor run time is exceeded by 4 minutes the motor will stop�
After approx� 60 minutes, the motor will have its full operational readiness again�
The LED of the unit will switch to standby after 5 minutes, and will only be activa-
ted again after pressing the buttons�
To Next Page
Loading...
