Schellenberg ROLLODRIVE 75 PREMIUM - Functional Description; Obstacle Detection

1918
GB
FUNCTIONAL DESCRIPTION G
LED is switched o󰀨 after 5 minutes. Press any key briey to perform a check. LED will
light again for 5 minutes�
2
1
3
4
5
6
Functional features & control options:
Manual operation�
Automatic operation (respectively
one switching time for upward and
downward movement)�
Switch automatic operation on / o󰀨
switching�
Switching between summer / winter
time�
End-position adjustment�
Permanent storage of the settings�
Obstacle detection�
Overload protection�
Reset to the factory settings (reset)�
LED ashes briey:
Conrmation by pressing the buttons
Sun, Clock or Twilight�
LED blinks:
After a power failure�
If the runtime is exceeded by 4
minutes�
In case of a reset�
For settings�
LED is constantly illuminated:
Status display for the respective
function (10 seconds)�
Open button
Roller shutter moves up or stops�
Close button
The roller shutter moves downwards or
stops� Sets values in the menu�
LED indicator light / status indicator
Sun button
Switches the sun function on / o󰀨.
Clock button
- Setting of the two switching times�
- Turning the time control on / o󰀨.
Twilight button
Switches the twilight function on or o󰀨.
1
2
3
4
6
5