www.scheppach.com / service@scheppach.com / +(49)-08223-4002-99 / +(49)-08223-4002-58
|
GB
2. Device description (Fig. 1-5)
Engine housing
2.
3.
4.
5. Additional handle
6. Tool receiver
7. Pointed chisel
8. Locking bolts
Clamping screw
Locking switch
3. Scope of delivery
• (1x) Demolition hammer
• (1x) Carrying case
• (1x) Oil can
• (1x) Pointed chisel
• (1x) Flat chisel
• (1x) Hexagon spanner (A)
• (2x) Spare carbon brush
• (1x) Operating manual
•
vice from the packaging.
•
•
•
damage. In the event of complaints the carrier must
Later claims will not be
recognised.
•
•
time.
•
•
equipment.
m Attention!
The device and the packaging material are not
children’s toys! Do not let children play with
plastic bags, lms or small parts! There is a dan-
ger of choking or suocating!
1. Introduction
Manufacturer:
scheppach
Fabrikation von
Dear customer,
and success.
Note:
laws, the manufacturer of this device assumes no
device arising from:
• Improper handling.
•
•
specialists.
•
• Improper use,
•
We recommend:
structions before installing and commissioning the
device. The operating instructions are intended to
help the user to become familiar with the machine
and take advantage of its application possibilities in
accordance with the recommendations. The operat
ing instructions contain important information on how
service life of the machine.
age with the machine at all times and store it in a
plastic cover to protect it from dirt and moisture.
who were instructed concerning the operation of the
machine and who are informed about the associat
ed dangers. The minimum age requirement must be
complied with.
operating manual and the particular instructions for
ulations for the operation of identical devices must
be complied with.
To Next Page
Loading...
Need help?
General
