www.scheppach.com / service@scheppach.com / +(49)-08223-4002-99 / +(49)-08223-4002-58
GB
|
Additional information for electric tools
Warning!
measured in accordance with a standardised test
and manner in which the electric tool is used and
es.
to compare one electric tool with other.
used for an initial assessment of the impairment.
Keep the noise level and vibration to a minimum!
•
•
•
• Do not overload the device.
•
•
•
Residual risks
Even when this electric tool is operated properly,
residual risks still remain. The following hazards
may arise in connection with the design and con-
struction of this electric tool:
Lung damage if suitable dust protection mask is
not worn.
2.
not worn.
3.
tion if the device is used over an extended period
tained.
7. Before commissioning
Before connecting the machine, make certain that
power data.
adjustments on the device.
• Familiarize
•
the plug into the socket.
•
• Before commissioning, check the machine for
damaged parts and determine whether these parts
In cases of doubt, the part in question must be re
placed.
Warning! This electric tool generates an electro
pair active or passive medical implants under certain
conditions. In order to prevent the risk of serious
manufacturer of the medical implant prior to operat
ing the electric tool.
6. Technical data
Stroke rate
Dimensions
Impact force
Protection class: II
Technical changes reserved!
Noise and vibration
The noise and vibration levels have been determined
Sound pressure level L
pA
pA
Sound power level L
Wear hearing protection.
Excessive noise can result in a loss of hearing.
Chisel
Vibration emission value
a
h, Cheq
2
2
Additional handle:
Vibration emission value
a
h, Cheq
2
2
To Next Page
Loading...
Need help?
General
