How to troubleshoot Scheppach ASP20-ES when the motor does not run?
If your Scheppach Vacuum Cleaner motor isn't running, first ensure the mains plug is properly inserted into the socket. If it is, verify that the socket has power, and if not, it's best to call an electrician. Finally, make sure the vacuum cleaner's on/off switch is in the 'on' position.
What to do if my Scheppach ASP20-ES has reduced vacuuming power?
If you notice reduced vacuuming power with your Scheppach Vacuum Cleaner, check these items: * First, see if the brush is blocked; if so, switch off the vacuum cleaner to remove any blockages. * Next, check if the dust bag is full and empty it if necessary. * Lastly, inspect the filter for dust accumulation and empty it if needed.
Indicates danger to life, risk of injury or damage to the tool if ignored.
Read operating instructions carefully to reduce the risk of inquiry.
Indicates double-insulated appliance that needs no earthing.
Unpack, install castors, machine head, handle, filters, hoses, and accessories.
Switch on/off, perform dry or wet vacuuming, and manage liquids.
Clean the device with a damp cloth; clean foam filter with soap and water.
Check cables for damage and ensure correct mains voltage.
General| Power | 1200 W |
|---|---|
| Tank Capacity | 20 L |
| Voltage | 230 V |
| Frequency | 50 Hz |
| Cable length | 4 m |
To Next Page
