Scheppach BASATO 4 User Manual

Manager:
Make sure all guards are secured shut when machine is on.
All electrical enclosures should only be opened with a tool that is not to be kept with the machine.
Revised Date:
www.machineryhouse.com.au
www.machineryhouse.co.nz
Aug-08
Use a push stick to remove off-cuts.
Plant Safety Program to be read in conjunction with manufactures instructions
LOW
Remove all loose objects around moving parts.
DUST.
ELECTRICAL
Must be connected to dust extraction.
OTHER HAZARDS, NOISE,
LOW
Support long heavy work pieces.
Wear safety glasses
HIGH
Risk Control Strategies
(Recommended for Purchase / Buyer / User)
Ensure bandsaw is on level ground to and safe place to prevent it falling.
Eliminate, avoid loose clothing / Long hair etc.
Isolate main power switch before changing blade, cleaning or adjusting.
Check blade tracking before starting.
Top blade guide system should be adjusted to suit material thickness.
MEDIUM
PUNCTURING
MEDIUM
Blade guards should always be in the closed position before starting machine.
A
C
D
ENTANGLEMENT
CUTTING, STABBING,
Assessment
H
SHEARING
PLANT SAFETY PROGRAM
No.
Hazard
Identification
O
F
STRIKING
Safety officer:
Should blade break turn off machine immediately and use foot brake to stop if supplied.
Wear hearing protection as required.
MEDIUM
Developed in Co-operation Between A.W.I.S.A and Australia Chamber of Manufactures
This program is based upon the Australian Worksafe Standard for Plant(NOHSC:1010-1994)
NEW MACHINERY HAZARD IDENTIFICATION, ASSESSMENT & CONTROL
Hands must always be kept well away from blade at all times.
Item
B
Authorised and signed by:
Hazard
Wood Bandsaw
LOW
CRUSHING

Scheppach BASATO 4 Specifications

General

Brand	Scheppach
Model	BASATO 4
Category	Saw
Language	English