www.scheppach.com
GB
|
27
were instructed concerning the operation of the ma-
chine and who are informed about the associated dan-
gers. The minimum age requirement must be complied
with.
-
-
technical rules concerning the operation of woodwork-
ing machines.
arise due to non-observance of these instructions and
2. Device description (Fig. 1- 1b)
1. Clamping screw
2. Top saw band roller
3. Rubber surface
4. Saw band guard
5. Top saw band guide
6. Table insert
7. Saw table
8. Table enlargement
9. Bottom saw band roller
10. Clamping lever
11. Foot
12. Cover locking mechanism
13. Side cover
14. Parallel stop
15.
16. Locking screw for top saw band roller
17. Set screw for top saw band roller
18. Machine frame
19. Mains cable
20. Motor
21. Wing nut
22. Locking handle for saw table
23. Clamping plate
24. Extraction nozzle
25. Mitre gauge (optional)
26. Saw band
27.
28. Locking handle for saw band guide
29. Push stick
30.
31.
32.
33. Screwdriver
34. Open-ended spanner SW10/13
35. Degree scale for swivel range
1. Introduction
Manufacturer:
Scheppach GmbH
Günzburger Straße 69
D-89335 Ichenhausen
Dear Customer,
success.
Note:
product that occurs due to:
• Improper handling,
• Non-compliance of the operating instructions,
•
technicians,
• Installation and replacement of non-original spare
parts,
•
•
due to the non-compliance of the electric regulations
and VDE regulations 0100, DIN 57113 / VDE0113.
We recommend:
Read through the complete text in the operating in-
structions before installing and commissioning the
device.
The operating instructions are intended to help the user
to become familiar with the machine and take advan-
tage of its application possibilities in accordance with
the recommendations.
The operating instructions contain important informa-
-
-
and service life of the machine.
-
Keep the operating instructions package with the
machine at all times and store it in a plastic cover to
protect it from dirt and moisture. Read the instruction
manual each time before operating the machine and
To Next Page
Loading...
Need help?
General
Weight and Dimensions
