EasyManua.ls Logo

Scheppach LMT225-53 - Page 30

Scheppach LMT225-53
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
www.scheppach.com
30
|
GB
7. Air lter
8. Side discharge
9. Wheel
10. Spark plug
11. Exhaust
12. Dip stick
13. Drive wheel
14. Wheel height adjustment
15. Discharge ap
16. Grass box
17. Pull starter
18. Cable clips
19. Mulch insert
20. -
3. Scope of delivery
Fig. 1 (a - e)
a) 2 x round head screw M8
b) 2 x washer big
c) 4 x washer small
d) 4 x plastic star grip nut
e) 1 x manual
4. Proper use
The machine meets the currently valid EU machine directive.
Before starting any work, all protective and safety devices must be in place.
• The machine has been designed to be operated by one person.
• The operator is responsible for third parties in the area of operations.
• All safety and hazard notices on the machine must be observed.
• All safety and hazard notices on the machine must be kept in a completely legible condition.
• Use the machine in a technically awless condition only, as well as for its intended purpose, in a
safe manner and being aware of dangers, in compliance with the operating instructions!
• Disruptions which can a󰀨ect safety in particular must be eliminated straight away!
• The manufacturer’s safety, operation and maintenance instructions as well as the technical data
given in the calibrations and dimensions must be adhered to.
• Relevant accident prevention regulations and other generally recognized safety and technical rules
must also be adhered to.
• The machine may only be used, maintained or repaired by trained persons who are familiar with the
machine and have been informed about the dangers. Unauthorized modications of the machine
exclude a liability of the manufacturer for damages resulting from the modications.
• The machine is intended for use only with original spare parts and original tools from the producer.
• Any other use is considered to be not intended. The manufacturer excludes any liability for resulting
damages, the risk is exclusively borne by the user.
• The device must not be used for commercial, technical or industrial applications.
• If you are not sure whether working conditions are safe or unsafe, do not work with the machine.