To Next PageTo Next PageWhat to do if Scheppach RoboCut L500 Lawn Mower displays 'BP - Rechargeable battery thermal protection' error?
If your Scheppach Lawn Mower displays the error 'BP - Rechargeable battery thermal protection', check the temperature of the rechargeable battery. If the temperature is too high, let the rechargeable battery cool down. If the temperature is too low, wait until the temperature is higher than 5°C.
What to do if Scheppach RoboCut L500 displays 'E3 - Cutter disc blocked' error?
If your Scheppach Lawn Mower displays the error 'E3 - Cutter disc blocked', switch it off. Turn the mower upside down and check what is preventing the blades from turning, remove the objects and turn the mower over.
What to do if Scheppach RoboCut L500 Lawn Mower displays 'E1 - Mower outside the working area' error?
If your Scheppach Lawn Mower displays the error 'E1 - Mower outside the working area', check that the mower is in the working area and ensure that the charging unit is properly connected to a suitable power supply.
What to do if Scheppach RoboCut L500 Lawn Mower displays 'E5 - The mower was lifted' error?
If your Scheppach Lawn Mower displays the error 'E5 - The mower was lifted', switch the mower off and move it to an area that is free of obstacles.
What to do if Scheppach RoboCut L500 Lawn Mower displays 'E7 - Inclination sensors were triggered' error?
If your Scheppach Lawn Mower displays the error 'E7 - Inclination sensors were triggered', switch the mower off and move it to an area in your lawn with level ground.
What to do if Scheppach RoboCut L500 Lawn Mower displays 'E8 - Docking/ recharging failed' error?
If your Scheppach Lawn Mower displays the error 'E8 - Docking/ recharging failed', check that there is 1 meter of space before and after the charging station, without obstacles or corners and manually place the mower in the charging station for charging.
What does error E1 mean on my Scheppach RoboCut L500 Lawn Mower?
If your Scheppach Lawn Mower displays an 'E1' error indicating it's outside the working area, first check that the mower is within the designated working zone. Also, ensure the charging station is correctly connected to a power supply. If it is properly connected, the boundary wires may be incorrectly attached and need to be transposed.
How to fix 'EE - Error unknown' on Scheppach RoboCut L500 Lawn Mower?
To resolve the 'EE - Error unknown' on your Scheppach Lawn Mower, try restarting the mower.
What to do if Scheppach RoboCut L500 Lawn Mower keeps getting stuck?
If your Scheppach Lawn Mower gets stuck, it may be due to unsuitable terrain or obstacles. Adapt the terrain or obstacle to the requirements of the robotic lawnmower, and adjust the laying of the boundary wire accordingly.
What to do if Scheppach RoboCut L500 displays 'E11 - No boundary signal' error?
If your Scheppach Lawn Mower displays the error 'E11 - No boundary signal', and the mower is in the working area, check the charging station LED indicator. If it lights up red, make sure that the boundary wires are well connected to the terminals.
General| Type | Robotic Lawn Mower |
|---|---|
| Cutting Width | 18 cm |
| Max Area | 500 m² |
| Battery Voltage | 18 V |
| Cutting Height | 20-60 mm |
| Weight | 7.5 kg |
| Maximum Slope | 25% |
| Mowing Time | 60 minutes |
| Battery Capacity | 2.0 Ah |
| Blade Type | 3 blades |
Covers user responsibility, prohibited users, and general precautions for safe operation.
Details safe operating procedures, environmental considerations, and handling of the product.
Specific safety advice for handling rechargeable batteries and charging equipment.
Highlights potential hazards that may remain despite safety precautions.
Instructions for correctly positioning and securing the charging station.
Details on how to connect the boundary wire to the charging station.
Instructions for laying the boundary wire, covering general installation, navigating obstacles, and managing slopes.
Steps to connect the charging station to the power supply.
Explains the meaning of the LED indicators on the charging station.
Initial steps to get the mower operational after installation.
How to set the desired grass cutting height.
Procedures for safely stopping the mower during operation.
Instructions for powering the device on.
Configuration options for the mower's functions and schedule.
Steps to set or modify the security PIN.
Instructions to set the correct date and time for scheduling.
How to adjust the programmed mowing start time.
Setting the duration and days for mowing operations.
Describes the specific function for mowing lawn edges.
Information on controlling the mower via a mobile application.
Steps required to register and set up the app.
Details on how the app communicates with the mower.
Overview of features available through the mobile app.
Step-by-step guide for replacing worn mower blades.
Instructions for handling the mower's battery.
Procedures for updating the mower's firmware.
Method for updating software using a USB drive.
Regulations and procedures for disposing of electronic waste.
Guidelines for the disposal of batteries.
A table listing symptoms, possible causes, and remedies for malfunctions.
A list of specific error codes and their corresponding solutions.
