Scheppach MS196-51

Questions and Answers:

A
andrewweissAug 5, 2025
Why Scheppach MS196-51 engine does not start?
- C
  Charles BarreraAug 5, 2025
  If your Scheppach Lawn Mower engine won't start, make sure you press the brake lever and check the speed lever position. Other potential causes include a defective spark plug (replace it, if needed), an empty fuel tank (refill it with fuel), or contaminated fuel (empty the tank and refill with clean fuel). In cold environments, try pushing the primer button if your model has one. If none of these steps work, it may indicate a faulty engine.
J
Jacob CollierAug 11, 2025
Why is my Scheppach Lawn Mower so loud and vibrating?
- D
  Deborah StanleyAug 11, 2025
  If your Scheppach Lawn Mower is running loudly and vibrating heavily, you should check the screws and blade fasteners to ensure they are not loose. Also, the blade might be unbalanced, in which case you should replace it.
K
kayla66Aug 17, 2025
What to do if Scheppach Lawn Mower engine runs unsteadily?
- H
  Howard PetersonAug 17, 2025
  If the engine of your Scheppach Lawn Mower runs unsteadily, the air filter or spark plug may be soiled. Try cleaning the air filter and spark plug.
C
Crystal MorrisAug 22, 2025
Why Scheppach Lawn Mower unsatisfactory bagging of the grass?
- G
  Gregory RossAug 23, 2025
  If your Scheppach Lawn Mower is not bagging grass properly, the cutting height might be too low, so set it to the correct height. Also, the blade could be worn, so replace it if necessary, and the basket might be clogged, so empty it.
D
dicksonbrendanAug 29, 2025
How to fix uneven mowing results with Scheppach MS196-51 Lawn Mower?
- A
  Ashley SnyderAug 29, 2025
  If your Scheppach Lawn Mower is leaving an uneven cut, the blade may be blunt, so sharpen it. Also, the cutting height might be too low, so adjust it to the correct setting.

Scheppach MS196-51 Specifications

General

Engine	196cc
Cutting width	51 cm
Drive	Self-propelled
Cutting height	25-75 mm
Collection bag capacity	65 L
Mulching function	Yes
Side discharge	Yes
Cutting height adjustment	Central

Summary

Explanation of Symbols on the Equipment

Safety Warnings and Precautions

Explains critical safety symbols related to operation, hazards, and protection.

Technical and Compliance Indicators

Covers symbols for fluid levels, specifications, and product conformity.

Introduction and Manufacturer Information

Manufacturer Details and Liability

Details about the manufacturer, Scheppach, and exclusions of liability for improper use.

Importance of Operating Instructions

Emphasizes reading and adhering to operating instructions for safe and effective machine use.

Machine Layout and Components

Parts Identification and Assembly

Lists and illustrates all components of the lawn mower and its assembly hardware.

Scope of Delivery and Handling

Unpacking and Damage Check

Instructions for unpacking, checking delivery completeness, and inspecting for transport damage.

Using Genuine Parts

Advises using only original spare parts and consumables for maintenance and repairs.

Packaging Safety for Children

Warning about suffocation risk from packaging materials and keeping them away from children.

Proper Use and Limitations

Operator Responsibilities and Standards

Covers machine compliance, operator duties, following instructions, and local regulations.

Intended Use and Prohibited Applications

Defines private use and lists specific activities the mower is not designed for.

Safety Instructions and User Restrictions

Interpreting Safety Alerts

Explains the different levels of safety warnings (DANGER, WARNING, CAUTION, NOTE) in the manual.

Prohibited Operators and Precautions

Identifies individuals prohibited from using the machine and general precautions for safe operation.

Hand-Operated Lawn Mower Safety

Operational Safety and Handling

Covers safe operation, handling, starting, stopping, and use in various conditions.

Fuel and Petrol Safety

Details precautions for handling petrol, refueling, and storage due to flammability.

Blade and Component Safety

Emphasizes inspection of blades, fasteners, and ensuring all guards are fitted and functional.

Risk Assessment and Safety Precautions

Ergonomic and PPE Considerations

Addresses risks from poor ergonomics and negligent use of personal protective equipment.

Noise Hazard and Emergency Response

Warns about hearing damage from noise and outlines emergency first aid procedures.

Technical Data and Specifications

Machine Specifications and Performance

Lists key technical specifications of the lawn mower, including engine, dimensions, and capacities.

Noise, Vibration, and Reduction

Presents noise and vibration data, along with recommendations for minimizing exposure.

Before First Use and Assembly

Required Tools and Materials

Lists necessary tools and materials for assembly and maintenance, not included with the product.

Component Assembly Steps

Provides step-by-step instructions for assembling the lawn mower components.

Operation and Adjustments

Pre-Operation Checks and Fueling

Details checks for oil level, adding petrol, and engine brake function before starting.

Starting and Driving the Mower

Instructions on how to start the engine and engage the drive lever for mowing.

Cutting Height Adjustment

Guidance on how to adjust the cutting height using the central lever.

Mowing Procedures and Safety Tips

Engine Start and Shutdown

Instructions for starting the engine safely and turning it off, including safety checks.

Pre-Mowing Safety Checks

Emphasizes proper attire, blade inspection, and ensuring guards are fitted before mowing.

Mowing Techniques and Safety

Provides tips for proper mowing, handling slopes, and maintaining safe distances.

Mulching Functionality

Explains how to use the mulching function by attaching the mulch insert.

Post-Mowing Procedures and Maintenance

Cleaning and Blade Inspection

Instructions for cleaning the mower housing, checking the blade, and replacing damaged parts.

Emptying the Grass Basket Safely

Details on how to safely remove and empty the grass basket after mowing.

After Mowing Storage

Guidance on cooling the engine, cleaning the mower, and storing it properly after use.

Cleaning and Maintenance

General Cleaning Procedures

Describes how to clean the mower, including specific methods for the underside and blade mount.

Blade Replacement and Damage

Provides instructions for changing the blade and handling damaged blades.

Checking and Changing Engine Oil

Details on how to check the oil level and change the engine oil annually.

Component Maintenance and Repairs

Cable Care and Air Filter Maintenance

Instructions for oiling cables and maintaining the air filter for optimal engine performance.

Spark Plug and Engine Brake Check

Guidance on checking the spark plug gap and verifying the engine brake function.

Repair Safety and Liability

Emphasizes safety during repairs and clarifies liability for damages from improper repairs.

Storage and Transportation Preparation

Long-Term Storage Guidelines

Advises on preparing the mower for storage, including fuel tank and engine oil changes.

Mower Preparation for Transport

Steps for preparing the mower for transportation, including emptying fuel and folding handlebars.

Disposal and Recycling

Transport Package Disposal

Information on how to dispose of packaging materials responsibly and safely.

Disposal of Defective Components

Guidance on disposing of defective unit components and accessories as special waste.

Troubleshooting Guide

Common Faults and Possible Causes

Lists common issues like heavy vibration, engine not starting, and uneven mowing with potential causes.

Troubleshooting Remedies

Provides solutions for common faults, including checking screws, fuel, spark plugs, and adjusting height.

Spare Parts and Service Information

Ordering Replacement Parts

Details required information for ordering replacement parts, such as machine type and article number.

Consumable and Wear Parts

Lists parts subject to normal wear, like spark plugs and air filters, which may require replacement.

Declaration of Conformity

EU Conformity Statement

Declares conformity of the product with relevant EU directives and standards.

Product Identification and Standards

Lists product name, article numbers, and referenced EU standards for compliance.

Manufacturers Declaration

Signed declaration by the manufacturer's Technical Director, confirming conformity.

Warranty Information

Warranty Conditions by Country

Details warranty terms and conditions for various European countries regarding defects and claims.

Related product manuals