Scheppach MS226-56E SE

MS226-56E SE
Art.Nr.
5911274917
AusgabeNr.
5911274917_01
Rev.Nr.
25/01/2023
Nachdrucke, auch auszugsweise, bedürfen der Genehmigung. Technische Änderungen vorbehalten. Abbildungen beispielhaft!
 www.scheppach.com
m ACHTUNG!: Vor Inbetriebnahme die Bedienungsanleitung genau durchlesen!
m CAUTION!: Read the manual carefully before operating this machine!
m ATTENTION!: Lire attentivement la notice avant toute mise en route !
DE
Benzin Rasenmäher (angetrieben)
Originalbedienungsanleitung
08 - 27
GB
Petrol Lawn Mower (self propelled)
Translation of original instruction manual
28 - 44
FR
Tondeuese Thermique (tractée)
Traduction des instructions d’origine
45 - 62

Scheppach MS226-56E SE Specifications

General

Cutting width	56 cm
Cutting height adjustment	5 levels (25-75 mm)
Collection bag capacity	70 L
Drive	Self-propelled
Grass Collection Bag Capacity	70 L
Engine	4-stroke
Engine Type	4-stroke
Wheels	Front 203 mm

Summary

Explanation of Symbols

1. Introduction

2. Device Description

3. Scope of Delivery

4. Proper Use

5. Safety Instructions

Understanding Safety Alerts

Explains different safety alert levels (Danger, Warning, Caution, Note) for user awareness.

Battery and Charger Safety

Specific safety precautions for handling and charging the battery pack and charger.

5. Safety Instructions

Hand-Operated Lawn Mower Safety

General safety advice for operating hand-operated lawn mowers.

Refueling Safety Precautions

Essential safety guidelines to follow when refueling the lawn mower.

5. Safety Instructions

General Mowing Safety Practices

Covers safe practices while mowing, including inclines, visibility, and pre-mow checks.

Residual Risks and Accident Prevention

Addresses residual risks like noise, ergonomics, and personal protective equipment (PPE).

Emergency Procedures

Guidelines for handling emergencies and providing first aid.

6. Technical Data

Unpacking and Initial Checks

Instructions for safely unpacking the device and verifying the contents and for damage.

7. Unpacking

8. Assembly Before Commissioning

Assembly Steps

Step-by-step guide for assembling the lawn mower components.

Setting the Cutting Height

Instructions on how to adjust the cutting height of the lawn mower.

Preparing the Area to be Mowed

Advice on preparing the mowing area by removing debris and obstacles.

9. Operation

Battery Charging and Fueling

Procedures for charging the battery and filling the fuel tank with oil and petrol.

Starting the Engine

Detailed steps for safely starting the lawn mower engine using the electric or pull starter.

Using the Drive System

Explanation of how to use the drive lever for movement and engaging the drive.

9. Operation

Engine Starting Procedures

Specific instructions for starting the engine via electric starter or pull cord.

Turning Off the Engine

Procedures for safely shutting down the lawn mower engine.

Pre-Mowing Preparations

Important checks and preparations to perform before starting to mow the lawn.

Tips for Proper Mowing

Mulching Mode Operation

Instructions for using the mulching function and its limitations.

Mowing Techniques and Blade Care

Best practices for mowing, blade maintenance, and avoiding damage.

Emptying the Grass Basket

Steps for safely removing and emptying the grass collection basket.

10. Cleaning

Cleaning Procedures and Methods

How to clean the mower after use, covering methods and approved products.

11. Transport and Storage

Preparation for Transport and Storage

Steps to prepare the mower for safe transport and storage.

13. Maintenance

General Maintenance Checks

Routine checks for security, functionality, and wear of parts.

Blade Maintenance and Replacement

Information on blade sharpening, balancing, and replacement by authorized personnel.

Checking the Oil Level

Procedure for checking the engine oil level before operation.

13. Maintenance

Routine Checks and Blade Care

Covers general checks, oil level, and blade maintenance/replacement.

Spark Plug Maintenance

Guide to checking, cleaning, and replacing the spark plug.

13. Maintenance

Wheel Axles and Hubs Greasing

Instruction to lightly grease wheel axles and hubs once a season.

14. Disposal and Recycling

Waste Electrical and Battery Disposal

Regulations for disposing of electrical waste and batteries.

15. Troubleshooting

Fault Diagnosis and Remedies

A table listing common faults, their possible causes, and recommended remedies.