EasyManua.ls Logo

Scheppach MTE460 AC - Troubleshooting Guide

Scheppach MTE460 AC
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
www.scheppach.com / service@scheppach.com / +(49)-08223-4002-99 / +(49)-08223-4002-58
GB
|
29
Service information
Please note that the following parts of this product
are subject to normal or natural wear and that the fol-
lowing parts are therefore also required for use as
consumables.
Wear parts*: Brush Assemblies, Blade Roller
* Not necessarily included in the scope of delivery!
14. Troubleshooting guide
Fault Possible causes Rectication
Motor does not start • No electricity in plug
• Cable defective
• Switch, switch/plug block defective
• Connections to motor or capacitor
disconnected
• Blade roller blocked
• Check line and fuse
• Have machine checked by a customer service
center
• Have machine checked by a customer service
center
• Have machine checked by a customer service
center
• If necessary adjust working depth. Clean housing
so that the roller can run freely
Engine performance
drops
• Soil is too rm
• Carbonbrushes worn out
• Roller badly worn
• Change working depth
• Check by a customer service center
• Replace roller
The Electric Tiller is
di󰀩cult to check.
• roller worn
• Wrong working depth
• Replace roller
• Correct working depth
Motor is running, roller
is not rotating
• Gearing defective • By customer service workshop

Table of Contents