www.scheppach.com
26
|
GB
2.
3.
m ATTENTION! Never use a “pressure washer” to
clean your tiller. Water can penetrate tight areas
of the tiller and its transmission case and cause
damage to spindles, gears, bearings, or the en-
gine. The use of pressure washers will result in
shortened life and reduce serviceability.
Maintaining the spark plug (Fig. 17)
of actual operation.
-
Replacing the motor oil (Fig. 10)
After 20 hours of operation
After 100 hours of operation
Place a receptacle underneath the motor to collect
the spent oil.
out completely. Use a hose or any other appropriate
Air lter (22) (Fig. 18)
-
-
-
-
factory clods.
-
dry.
-
-
ture content.
-
garden alternately.
-
at a lightly faster rate.
the garden area.
10.3 Cultivating
11. Maintenance
-
-
Cleaning Tine Area
-
mediately instead of after it dries.
1.
2.
3.
transmission housing.
Checking the clutch
1.
To Next Page
Loading...
